Cobalt naphthenate Property

Melting point:

<-7℃

Density 

0.921 g/mL at 25 °C

vapor pressure 

0Pa at 20℃

refractive index 

n20/D 1.4620

Flash point:

120 °F

storage temp. 

2-8°C

form 

liquid

color 

dark

Specific Gravity

0.95

Water Solubility 

Insoluble in water.

EPA Substance Registry System

Cobalt naphthenate (61789-51-3)

Safety

Hazard Codes 

Xn,N,T

Risk Statements 

49-10-36/38-42/43-50/53-40-65

Safety Statements 

53-23-45-60-61-36/37-62

RIDADR 

UN 1993 3/PG 3

WGK Germany 

3

RTECS 

QK8925000

TSCA 

Yes

HazardClass 

3

PackingGroup 

III

HS Code 

29319090

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H226Flammable liquid and vapour

H304May be fatal if swallowed and enters airways

H317May cause an allergic skin reaction

H372Causes damage to organs through prolonged or repeated exposure

H412Harmful to aquatic life with long lasting effects

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P331Do NOT induce vomiting.

Cobalt naphthenate Chemical Properties,Usage,Production

Description

Cobalt naphthenate is a brown powder or bluish-red solid; Freezing/Melting point =140℃; Flashpoint =49℃; Autoignition temperature =276℃. HazardIdentification (based on NFPA-704 M Rating System):Health 1, Flammability 2, Reactivity 0. Insoluble in water.

Chemical Properties

Black liquid

Chemical Properties

Cobalt naphthenate is a flammable brown powder or bluish-red solid; freezing/melting point = 140°C; flash point = 49°C; autoignition temperature = 276°C. Hazard identification (based on NFPA-704 M Rating System): Health 1, flammability 2, reactivity 0. Insoluble in water.

Uses

Cobalt naphthenate is widely used in polyester resins and paint driers. It is used as a curing accelerator, cross linker catalyst for unsaturated polyester resins. It is also used in the production of adhesives, varnishes and waterproofing agents for textiles. Further, it is used as corrosion inhibitors, lubricants, and fuel additives. It plays an important role as oil drying agents.

Uses

Cobalt naphthenate may be used as a catalyst that facilitates the free radical polymerization of (3-methacryloxypropyl)trimethoxysilane (MPS), which can be used to functionalize alumina nanoparticles. It can be used as a promoter for the development of unsaturated flame retardant polyesters.

General Description

Cobalt naphthenate is a brown powder or a bluish-red solid. Cobalt naphthenate is easily ignited and once ignited can burn profusely. Cobalt naphthenate is used to make paints and varnish.

Air & Water Reactions

Highly flammable.

Reactivity Profile

COBALT NAPHTHENATE has weak oxidizing or reducing powers. Redox reactions can however still occur. The majority of compounds in this class are slightly soluble or insoluble in water. If soluble in water, then the solutions are usually neither strongly acidic nor strongly basic. These compounds are not water-reactive.

Health Hazard

Fire may produce irritating and/or toxic gases. Contact may cause burns to skin and eyes. Contact with molten substance may cause severe burns to skin and eyes. Runoff from fire control may cause pollution.

Fire Hazard

Flammable/combustible material. May be ignited by friction, heat, sparks or flames. Some may burn rapidly with flare burning effect. Powders, dusts, shavings, borings, turnings or cuttings may explode or burn with explosive violence. Substance may be transported in a molten form at a temperature that may be above its flash point. May re-ignite after fire is extinguished.

Flammability and Explosibility

Not classified

Contact allergens

Cobalt naphthenate is made by treating cobalt hydroxide or acetate with naphthenic acid. It is an accelerant in rubber, unsaturated polyester, and vinyl ester resins.

Safety Profile

Moderately toxic by ingestion. Flammable when exposed to heat or flame. When heated to decomposition it emits acrid smoke and irritating fumes.

Potential Exposure

Cobalt naphthenate is used as a drying agent in paints, varnishes; inks, and for curing plastics.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.Medical observation is recommended for 24-48 hours afterbreathing overexposure, as pulmonary edema may bedelayed. As first aid for pulmonary edema, a doctor orauthorized paramedic may consider administering a corticosteroid spray

storage

Color Code—Red: Flammability Hazard: Store ina flammable materials storage area. Prior to working withthis chemical you should be trained on its proper handlingand storage. Store in tightly closed containers in a cool,well-ventilated area away from strong oxidizers (such aschlorine, bromine, and fluorine). Sources of ignition, suchas smoking and open flames, are prohibited where cobaltnaphthenate is used, handled, or stored in a manner thatcould create a potential fire or explosion hazard

Shipping

UN2001 Cobalt naphthenate powder, Hazard Class: 4.1; Labels: 4.1-Flammable solid. UN1993 Flammable liquids, n.o.s., Hazard Class: 3; Labels: 3-Flammable liquid, Technical Name Required

Incompatibilities

Highly flammable; powder or dust can form an explosive mixture with air. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides.