2-Furoic acid Chemical Properties

Melting point:

−2 °C(lit.)

Boiling point:

173-174 °C(lit.)

Density 

1.324 g/mL at 25 °C(lit.)

vapor pressure 

13.732Pa at 25℃

refractive index 

n20/D 1.531(lit.)

Flash point:

185 °F

storage temp. 

Keep in dark place,Sealed in dry,Room Temperature

solubility 

37g/l

form 

Fine Crystalline Powder

pka

3.16(at 25℃)

color 

Off-white to beige

Odor

odorless

Odor Type

odorless

Water Solubility 

36 g/L (20 ºC)

Merck 

14,4307

BRN 

110149

InChIKey

SMNDYUVBFMFKNZ-UHFFFAOYSA-N

LogP

0.628 at 25℃

CAS DataBase Reference

88-14-2(CAS DataBase Reference)

NIST Chemistry Reference

2-Furancarboxylic acid(88-14-2)

EPA Substance Registry System

2-Furancarboxylic acid (88-14-2)

Safety Information

Hazard Codes 

C,Xi

Risk Statements 

34-36/37/38

Safety Statements 

26-36/37/39-45-36-37/39

RIDADR 

UN 3265 8/PG 2

WGK Germany 

3

RTECS 

LV1763000

F 

10-19-21

TSCA 

Yes

HS Code 

29321900

MSDS

• Language:English Provider:2-Furancarboxylic acid
• Language:English Provider:SigmaAldrich
• Language:English Provider:ACROS
• Language:English Provider:ALFA

2-Furoic acid Usage And Synthesis

Description

2-Furoic acid is an organic compound, consisting of a furan ring and a carboxylic acid side-group. Along with other furans, its name is derived from the Latin word furfur, meaning bran, from which these compounds were first produced. The salts and esters of furoic acids are known as furoates. 2-Furoic acid is most widely encountered in food products as a preservative and a flavouring agent, where it imparts a sweet, earthy flavour.

Chemical Properties

white to light yellow crystal powder. 1g is dissolved in 26ml cold water or 4ml boiling water, easily soluble in ethanol and ether. Sublimation at 130-140°C (6.65-8kPa).

Uses

2-Furoic acid is an heterocyclic carboxylic acid that is widely used in food products as a preservative and flavouring agent. It is also used in the synthesis of methylfuran, furoamide and furoic acid esters and salts. In the plastics industry, it can be used as plasticizer, thermosetting resin, etc. substitute for chloropicrin in disinfecting grain elevators.

Preparation

2-furoic acid can be synthesized by the oxidation of furfural. The reaction was carried out at 45°C with vigorous stirring. The reactant is filtered to recover the catalyst copper oxide, the filtrate is acidified with 50% sulfuric acid to pH 3-2.5, suction filtered, washed with water, and dried to obtain 2-furoic acid.

Application

2-Furoic acid (FA) is a preservative, acting as a bactericide and fungicide. Some of the applications of 2-furoic acid include:
Synthesis of a single-molecule magnet, Mn11Gd2 based high-nuclearity heterometallic complex.
Synthesis of orally active antidiabetic vanadyl complex, bis(α-furancarboxylato)oxovanadium(IV).
As a ligand in the synthesis of luminescent 4f-3d heterometallic one-dimensional coordination polymers.
Synthesis of biocompatible multifunctional dextran furoate nanospheres.
FA is often used as a starting material for the production of furoate esters.
FA and its derivatives are also used in the production of nylons principally applied in biomedical researches.

Definition

ChEBI: 2-furoic acid is a furoic acid having the carboxylic acid group located at position 2. It has a role as an inhibitor, a human xenobiotic metabolite, a Saccharomyces cerevisiae metabolite, a plant metabolite and a bacterial xenobiotic metabolite. It is a conjugate acid of a 2-furoate.

Biological Functions

2-Furoic acid was shown to effectively lower serum cholesterol and serum triglyceride levels significantly in rats with an elevation of HDL cholesterol level at 20 mg/kg/day orally. 2-furoic acid appears to interfere directly with the activity of intracellular enzymes rather than affecting high affinity-mediated lipoprotein membrane receptors. In vivo, treatment with 2-furoic acid led to a reduction in the liver and small intestine ATP-dependent citrate lyase, acetyl CoA synthetase, acyl CoA cholesterol acyl transferase, sn-glycerol 3-phosphate acyl transferase, phosphatidylate phosphohydrolase, and heparin induced lipoprotein lipase activities. 2-Furoic acid reduced biliary cholesterol levels, but the agent increased bile salts, which are lithogenic. Acute toxicity studies in mice suggest that the agent has some hepatic toxicity effects. The LD50 was relatively low at 250 mg/kg IP in mice[1].

Hazard

Strong irritant to eyes and skin.

Flammability and Explosibility

Not classified

Purification Methods

Crystallise the acid from hot water (charcoal), dry it at 120o for 2hours, then recrystallise it from CHCl3, and again dry it at 120o for 2hours. For use as a standard in volumetric analysis, good quality commercial acid should be crystallised from CHCl3 and dried as above or sublimed at 130-140o/50-60mm or less. [Beilstein 18 I 438, 18 II 265, 18 III/IV 3914, 18/6 V 102.]

References

[1] Iris H. Hall. “Hypolipidemic Effects of 2-Furoic Acid in Sprague-Dawley Rats.” Archiv der Pharmazie 326 1 (1993): 15–23.

2-Furoic acid(88-14-2)Related Product Information

• 3-(2-Furyl)acrylic acid
• Mometasone furoate
• Ethyl 2-(Chlorosulfonyl)acetate
• Benzyl benzoate
• Glycine
• Folic acid
• Furan
• 2,3,4-Trihydroxybenzoic acid
• Retinoic acid
• 2,4-Dichlorobenzoic acid
• Tetrahydrofuran
• 2,5-Furandicarboxylic acid
• Benzoic acid
• Furfurylamine
• 3-Furanboronic acid
• FURAN-2,3-DICARBOXYLIC ACID
• 5-Nitro-2-furoic acid
• Nifuratel Impurity 20 (Mixture of Diastereomers)