Tetrabutylammonium bromide Chemical Properties

Melting point:

102-106 °C(lit.)

Boiling point:

102 °C

Density 

1.039 g/mL at 25 °C

vapor pressure 

0Pa at 25℃

refractive index 

n20/D 1.422

Flash point:

100℃

storage temp. 

Store below +30°C.

solubility 

H₂O: 0.1 g/mL, clear, colorless

form 

Crystalline Powder

pka

0[at 20 ℃]

Specific Gravity

1.007

color 

White to slightly cream

Odor

Amine like

PH

3.5 to 7.0 (50 g/L, 25 ℃)

Water Solubility 

600 g/L (20 ºC)

Sensitive 

Hygroscopic

λmax

λ: 240 nm Amax: 0.04
λ: 250 nm Amax: 0.03
λ: 260 nm Amax: 0.02
λ: 500 nm Amax: 0.02

BRN 

3570983

Stability:

Stable. Incompatible with strong oxidizing agents. Protect from moisture.

InChIKey

JRMUNVKIHCOMHV-UHFFFAOYSA-M

LogP

0.839 at 25℃

CAS DataBase Reference

1643-19-2(CAS DataBase Reference)

NIST Chemistry Reference

Tetra-N-butylammonium bromide(1643-19-2)

EPA Substance Registry System

Tetrabutylammonium bromide (1643-19-2)

Safety Information

Hazard Codes 

Xi,Xn

Risk Statements 

36/37/38-22

Safety Statements 

26-36-37/39

WGK Germany 

3

F 

3

Hazard Note 

Irritant

TSCA 

Yes

HS Code 

29239000

MSDS

• Language:English Provider:Tetrabutylammonium bromide
• Language:English Provider:ACROS
• Language:English Provider:SigmaAldrich
• Language:English Provider:ALFA

Tetrabutylammonium bromide Usage And Synthesis

Physical and Chemical Properties

Tetrabutylammonium bromide, also known as tetrabutylammonium bromide. White crystal, deliquescence. 118 ℃ melting point. Soluble in water, alcohol, ether and acetone, slightly soluble in benzene.

Figure 1:  a structural formula of tetrabutylammonium bromide

Application

(1) Used as a reagent for the analysis of organic synthesis.
(2) Tetrabutylammonium bromide is also an effective phase transfer catalyst.
Phase transfer catalyst, referred to as PTC, is able to transfer the aqueous phase (or organic phase) to the organic phase (or aqueous phase) catalyst, which can make the reaction between the aqueous phase and the organic phase of the catalyst. PTC has the function of changing the degree of ion solvation, increasing the activity of ion reaction, speeding up the reaction rate and so on. Solve the problem of the past in the two phases of the reaction is difficult to react.
Common quaternary ammonium salt phase transfer catalysts are: benzyl triethyl ammonium chloride, trioctyl methyl ammonium chloride, tetramethyl ammonium bromide, tetrapropylammonium chloride, tetrabutylammonium bromide , tetrabutyl ammonium iodide, benzyl triethyl ammonium bromide, triethyl hexyl bromide, octyl triethylammonium bromide.
Phase transfer catalyst is widely applied in organic synthesis: R2C for preparing compounds (carbene type compound), further preparation of the corresponding nitrile, isonitrile, Halon, dichloromethane cyclopropane derivatives, hydroxy acids and diazomethane. For the alkylation reaction, compared with traditional methods, to avoid the harsh conditions of dry operation, and high yield, it can also be used in the redox reaction, ester hydrolysis, substitution reaction, condensation reaction, addition reaction, polymerization reaction, addition reaction of carbon and the elimination of reaction and so on.
(3) For organic synthesis intermediates, phase transfer catalyst
(4) Ion-pairing reagents for the synthesis of bacampicillin, sultamicillin like.
(5) Ion pair chromatography reagents, phase transfer catalyst. Bacampicillin, sultamicillin like synthesis.

Uses

Tetrabutylammonium bromide (TBAB) is a quaternary ammonium compound. It is the most widely used phase transfer catalyst. Its interfacial properties have been studied in case of hydroxide initiated reactions. This may be applied in understanding the mechanism of phase transfer reactions. TBAB is reported to decrease retention time and remove peak tailing by acting as an ion pair reagent during the chromatographic analysis of quaternary ammonium compounds. In the molten state TBAB behaves like an ionic liquid which is a promising green alternative to organic solvents in organic synthesis. Its molar heat capacity, entropy and free energy function have been determined.
Recently, molten tetrabutylammonium bromide (TBAB) was used as a low toxic and cost-effective IL in a number of constructive synthetic transformations.
Tetrabutylammonium bromide (TBAB) may be used in the molten state in the following processes:
Synthesis of (2S)-5-(3-phenyl-2-phthalimidylpropanoylamino)isophthalic acid.
Synthesis of alkyl-substituted pyrroles in the absence of catalyst and organic solvent.
Synthesis of dithioacetals from acetals by transthioacetalisation in a solvent free environment.
Synthesis of polyamides (PAs) by the polymerization of terephthalic acid and diisocyanates.
Catalyze the addition of thiols to conjugated alkenes.
Dehydrochlorination of poly(vinyl chloride).

preparation

Preparative Methods: several methods are available to recover the quaternary ammonium ion efficiently.Prepared by reaction of tri-n-butylamine and n-butyl bromide.

Toxicity

The acute oral LD50 (mouse): 590mg/kg. Inhalation, ingestion and skin contact toxic to the skin, eyes and respiratory system irritation.
More information from the ChemicalBook Xiaonan editor (2015-09-16).

Chemical Properties

white crystals or powder

Uses

Tetrabutylammonium Bromide is used in the synthesis of polymer solar cells. Also used in the synthesis of single component green-light emitting electrochemical cells.

Definition

ChEBI: Tetrabutylammonium bromide is a tetrabutylammonium salt with bromide as the anionic counterpart. It is an organic bromide salt and a tetrabutylammonium salt.

benefits

Tetrabutylammonium bromide is an environmentally benign, non-volatile, non-flammable, non-corrosive, low-cost, commercially available ammonium salt with high thermal and chemical stability. In TBAB, tetrabutylammonium salt can dissolve in both aqueous as well as in organic solvents, which helps to transport the water-soluble anionic reactants into the organic phase. Moreover, molten TBAB was also employed as an efficient ionic liquid to carry out organic transformations under solvent-free conditions[1].

General Description

Tetrabutylammonium bromide, a quaternary ammonium compound widely used as a phase transfer catalyst. TBAB decreases the retention time and removes peak tailing by acting as an ion pair reagent during the chromatographic analysis of quaternary ammonium compounds. In the molten state, TBAB behaves like an ionic liquid, which is a promising green alternative to organic solvents in polymer synthesis.

Flammability and Explosibility

Not classified

Purification Methods

Crystallise the salt from *benzene (5mL/g) at 80o by adding hot n-hexane (three volumes) and allowing to cool. Dry it over P2O5 or Mg(ClO4)2, under vacuum. The salt is very hygroscopic. It can also be crystallised from ethyl acetate or dry acetone by adding diethyl ether and dried in vacuo at 60o for 2 days. It has been crystallised from acetone by addition of diethyl ether. It is so hygroscopic that all manipulations should be carried out in a dry-box. It has been purified by precipitation from a saturated solution in dry CCl4 on addition of cyclohexane or by recrystallisation from ethyl acetate, then heating in vacuum to 75o in the presence of P2O5. [Symons et al. J Chem Soc, Faraday Trans 1 76 2251 1908.] It also recrystallises from CH2Cl2/diethyl ether and is dried in a vacuum desiccator over P2O5. [Blau & Espenson J Am Chem Soc 108 1962 1986, Beilstein 4 IV 657.]

References

[1] Banik B, et al. Tetrabutylammonium Bromide (TBAB) Catalyzed Synthesis of Bioactive Heterocycles. Molecules, 2020; 25: 5918.

Tetrabutylammonium bromide(1643-19-2)Related Product Information

• Ammonium hydroxide
• Molybdic acid
• Tetrapropylammonium bromide
• Ethidium bromide
• Tetraheptylammonium bromide
• Tetraethylammonium bromide
• Ammonium sulfate
• Tetraoctylammonium bromide
• Allyl bromide
• TETRABUTYL AMMONIUM BROMIDE
• Ammonium formate
• Ammonium acetate
• TETRABUTYLAMMONIUM BROMIDE PERBROMIDE (TRIBROMIDE),TBABr3, Tetrabutylammonium bromide perbromide,TETRABUTYLAMMONIUM BROMIDE PERBROMIDE
• Ammonium chloride
• Rocuronium bromide
• Sodium bromate
• Ammonium bromide
• Tetrabutylammonium acetate