2-Nitrophenol Chemical Properties

Melting point:

43-45 °C

Boiling point:

214-216 °C

Density 

1.495

vapor pressure 

1 mm Hg ( 49.3 °C)

refractive index 

1.5723

Flash point:

108 °C

storage temp. 

Store in dark!

solubility 

2 g/L (25°C)

pka

7.17(at 25℃)

form 

Liquid

color 

Clear pale yellow

PH Range

Colorless (5.0) to yellow (7.0)

PH

5.0～7.0

Odor

Aromatic odor

Water Solubility 

2 g/L (25 ºC)

Sensitive 

Light Sensitive

Merck 

14,6619

BRN 

775403

Henry's Law Constant

At 20 °C: 11.1 at pH 8.1, 11.0 at pH 10.2, 8.9 at pH 11.9, 6.7 at pH 13.7 (wetted-wall column-UV, Zhang et al., 2003)

Stability:

Stable. Incompatible with strong bases, strong oxidizing agents.

Major Application

High voltage capacitors, inks, energetic materials, corrosion inhibitors, fertilizer, food storage, enzyme assays, detecting microorganisms, immunotherapy, drugs

LogP

1.77

Dissociation constant

7.23 at 25℃

CAS DataBase Reference

88-75-5(CAS DataBase Reference)

NIST Chemistry Reference

Phenol, 2-nitro-(88-75-5)

EPA Substance Registry System

o-Nitrophenol (88-75-5)

Safety Information

Hazard Codes 

Xn,T,F

Risk Statements 

22-36/37/38-52/53-33-20/21/22-39/23/24/25-23/24/25-11

Safety Statements 

26-61-45-36/37-16-7-36-28

RIDADR 

UN 1663 6.1/PG 3

WGK Germany 

2

RTECS 

SM2100000

Autoignition Temperature

550 °C

TSCA 

Yes

HazardClass 

6.1

PackingGroup 

III

HS Code 

29089000

Hazardous Substances Data

88-75-5(Hazardous Substances Data)

Toxicity

LD50 orally in mice, rats: 1.297, 2.828 g/kg, K. C. Back et al., Reclassification of Materials Listed as Transportation Health Hazards (TSA-20-72-3; PB214-270, 1972)

MSDS

• Language:English Provider:2-Hydroxynitrobenzene
• Language:English Provider:SigmaAldrich
• Language:English Provider:ALFA

2-Nitrophenol Usage And Synthesis

Chemical Properties

yellow crystalline solid

Uses

2-Nitrophenol is an intermediate in dyestuff production and a chemical indicator.

Uses

2-Nitrophenol is a building block used as an acid-base indicator and corrosion inhibitor for aluminum-copper alloy. It is also used to make dyes, paint coloring, rubber chemicals, and substances that kill molds.

Uses

manufacture of dyes, paint colorings, rubber chemicals, and fungicides. Indicator in 2% alcohol solution. pH: 5.0 colorless, 7.0 yellow, but the color change is not sharp and cannot be used where CO2 is present; as reagent for glucose.

Production Methods

2-Chloronitrobenzene in 8.5 % sodium hydroxide solution is heated gradually (exothermic) to 170 ℃ in an autoclave and held there under pressure for 8 h. The resulting solution is cooled and acidified to give the product 2-Nitrophenol in 95 % yield.

Definition

ChEBI: A member of the class of 2-nitrophenols that is phenol in which one of the hydrogens that is ortho to the hydroxy group has been replaced by a nitro group.

Synthesis Reference(s)

Canadian Journal of Chemistry, 67, p. 220, 1989 DOI: 10.1139/v89-037
Tetrahedron, 44, p. 4555, 1988 DOI: 10.1016/S0040-4020(01)86158-5

General Description

Yellow solid. Sinks in and mixes slowly with water.

Air & Water Reactions

Water insoluble.

Reactivity Profile

2-Nitrophenol is a yellow, crystalline material, moderately toxic, low melting point (45° C). When heated to decomposition 2-Nitrophenol emits toxic fumes of oxides of nitrogen. In molten form violent reaction with strong alkali (85 % potassium hydroxide) [491 M, 1975, p. 342]. Reaction product with chlorosulfuric acid decomposes violently at room temperature [Vervalin, C. H., Hydrocarbon Proc., 1976, 55(9), p. 321].

Hazard

Toxic by ingestion.

Health Hazard

Inhalation or ingestion causes headache, drowsiness, nausea, and blue color in lips, ears, and fingernails (cyanosis). Contact with eyes causes irritation. Can be absorbed through the intact skin to give same symptoms as for inhalation.

Fire Hazard

Special Hazards of Combustion Products: Toxic and irritating fumes of unburned material and oxides of nitrogen can form in fire.

Environmental Fate

Biological. A microorganism, Pseudomonas putida, isolated from soil degraded 2-nitrophenol to nitrite. Degradation by enzymatic mechanisms produced nitrite and catechol. Catechol subsequently degraded to β-ketoadipic acid (Zeyer and Kearney, 1984). When 2-nitrophenol was statically incubated in the dark at 25 °C with yeast extract and settled domestic wastewater inoculum, 100% biodegradation with rapid adaptation was achieved after 7 d (Tabak et al., 1981). In a similar study, 2-nitrophenol degraded rapidly from flooded alluvial and pokkali (organic matter-rich acid sulfate) soils that were inoculated with parathion-enrichment culture containing 5- day-old cultures of Flavobacterium sp. ATCC 27551 and Pseudomonas sp. ATCC 29353 (Sudhaker-Barik and Sethunathan, 1978a). 2-Nitrophenol disappeared completely with the formation of nitrite, particularly in the inoculated soils rather than in the uninoculated soils.
Groundwater. Nielsen et al. (1996) studied the degradation of 2-nitrophenol in a shallow, glaciofluvial, unconfined sandy aquifer in Jutland, Denmark. As part of the in situ microcosm study, a cylinder that was open at the bottom and screened at the top was installed through a cased borehole approximately 5 m below grade. Five liters of water was aerated with atmospheric air to ensure aerobic conditions were maintained. Groundwater was analyzed weekly for approximately 3 months to determine 2-nitrophenol concentrations with time. The experimentally determined first-order biodegradation rate constant and corresponding half-life were 0.05/d and 13.86 d, respectively.
Photolytic. A second-order reaction rate constant of 9 x 10^-13 cm³/molecule?sec was reported for the reaction of 2-nitrophenol and OH radicals in the atmosphere (Atkinson, 1985). Chemical/Physical. Oxidation by Fenton’s reagent (hydrogen peroxide and Fe³⁺) produced nitrohydroquinone and 3-nitrocatechol (Andersson et al., 1986). In an aqueous solution (initial pH 5.0), 2-nitrophenol (100 μM) reacted with Fenton’s reagent (35 μM). After 60-min and 4-h, about 50 and 90% of the 2-nitrophenol was destroyed, respectively. The pH of the solution decreased due to the formation of nitric acid (Lipczynska-Kochany, 1991).

Purification Methods

Crystallise 2-nitrophenol from EtOH/water, water, EtOH, *benzene or MeOH/pet ether (b 70-90o). It can be steam distilled. Petrucci and Weygandt [Anal Chem 33 275 1961] crystallised it from hot water (twice), then EtOH (twice), followed by fractional crystallisation from the melt (twice), drying over CaCl2 in a vacuum desiccator and then in a drying pistol. The 4-nitrobenzoate had m 141o (from EtOH). [Beilstein 6 IV 1246.]

2-Nitrophenol(88-75-5)Related Product Information

• 2-Ethylnitrobenzene
• 2-Nitrobenzaldehyde
• 2-Nitrotoluene
• 2-Chloro-4-nitrophenol
• 2-Nitrobenzyl alcohol
• 2-Nitrobenzoic acid
• Nitrobenzene
• 4-METHYL-2-NITROPHENOL
• Nitrophenol
• 2,4-Dinitrophenol
• 2-Nitrochlorobenzene
• 2-Nitrophenol
• 4-Nitrophenol
• Sodium 4-nitrophenoxide
• 2-Amino-4-nitrophenol
• 4-METHYL-3-NITROPHENOL
• 2-Amino-5-nitrophenol
• PICRIC ACID