- Product Name:
- AKOS BBS-00004381
- Product Categories:
- Routine Reagents
- TLC Reagents, S-Z
- TLC Visualization Reagents (alphabetic sort)
- HPLC Buffer
- HPLC Buffers
- HPLC Buffers - SolutionChromatography/CE Reagents
- LC-MS Additives
- Mass Spectrometry (MS)&LC-MS
- Biological Buffers
- BioUltra Buffers
- LEDA HPLC
- Intermediates of Dyes and Pigments
- Analytical Reagents for General Use
- Puriss p.a.
- T-Z, Puriss p.a.
- Amino Acid Analysis ReagentsChemical Synthesis
- Organic BasesAmino Acid Analysis
- Regents for amino acid analysis
- Amino Acid Analysis
- Peptide Analysis and Characterization
- Reagents for amino acid derivatisation&detection
- Organic BasesProtein Structural Analysis
- Protein Sequencing
- Reagents for Protein Sequencing
- Chemical Synthesis
- Organic Bases
- Synthetic Reagents
- Reagent PlusDerivatization Reagents TLC
- Essential Chemicals
- HPLC and LCMS Mobile Phase Additive
- Mol File:
Triethylamine Chemical Properties
- Melting point:
- -115 °C
- Boiling point:
- 90 °C
- vapor density
- 3.5 (vs air)
- vapor pressure
- 51.75 mm Hg ( 20 °C)
- refractive index
- n20/D 1.401(lit.)
- 4246 | TRIETHYLAMINE
- Flash point:
- 20 °F
- storage temp.
- water: soluble112g/L at 20°C
- 10.75(at 25℃)
- Specific Gravity
- 0.725 (20/4℃)
- 12.7 (100g/l, H2O, 15℃)(IUCLID)
- Relative polarity
- explosive limit
- Water Solubility
- 133 g/L (20 ºC)
- JECFA Number
- Henry's Law Constant
- 1.79 at 25 °C (Christie and Crisp, 1967)
- Exposure limits
- NIOSH REL: IDLH 200 ppm; OSHA PEL: TWA 25 ppm (100 mg/m3); ACGIH TLV: TWA 1 ppm, STEL 3 ppm (adopted).
- Stable. Extremely flammable. Readily forms explosive mixtures with air. Note low flash point. Incompatible with strong oxidizing agents, strong acids, ketones, aldehydes, halogenated hydrocarbons.
- CAS DataBase Reference
- 121-44-8(CAS DataBase Reference)
- NIST Chemistry Reference
- EPA Substance Registry System
- Ethanamine, N,N-diethyl-(121-44-8)
- Hazard Codes
- Risk Statements
- Safety Statements
- UN 1296 3/PG 2
- WGK Germany
- Autoignition Temperature
- 593 °F
- Hazard Note
- Highly Flammable/Corrosive
- HS Code
- Hazardous Substances Data
- 121-44-8(Hazardous Substances Data)
- LD50 orally in rats: 0.46 g/kg (Smyth)
Triethylamine Usage And Synthesis
Triethylamine (formula: C6H15N), also known as N, N-diethylethanamine, is the most simple tri-substituted uniformly tertiary amine, having typical properties of tertiary amines, including salifying, oxidation, Hing Myers test (Hisberg reaction) for triethylamine does not respond. It is colorless to pale yellow transparent liquid, with a strong smell of ammonia, slightly fuming in the air. Boiling point: 89.5 ℃, relative density (water = 1): 0.70, the relative density (Air = 1): 3.48, slightly soluble in water, soluble in alcohol, ether. Aqueous solution is alkaline, flammable. Vapor and air can form explosive mixtures, the explosion limit is 1.2% to 8.0%. It is toxic, with a strong irritant.
Triethylamine is a clear, colorless liquid with an Ammonia or fish-like odor. It is used in making waterproofing agents, and as a catalyst, corrosion inhibitor and propellant.
It is mainly used as base, catalyst, solvent and raw material in organic synthesis and is generally abbreviated as Et3N, NEt3 or TEA. It can be used to prepare phosgene polycarbonate catalyst, polymerization inhibitor of tetrafluoroethylene, rubber vulcanization accelerator, special solvent in paint remover, enamel anti-hardener, surfactant, antiseptic, wetting agent, bactericides, ion exchange resins, dyes, fragrances, pharmaceuticals, high-energy fuels, and liquid rocket propellants, as a curing and hardening agent for polymers and for the desalination of seawater.
Consumption Quota of in medical industry:
It is produced by ethanol and ammonia in the presence of hydrogen, in containing Cu-Ni-clay catalyst reactor under heating conditions (190 ± 2 ℃ and 165 ± 2 ℃) reaction. The reaction also produces ethylamine and diethylamine, products were condensed and then absorption by ethanol spray to obtain crude triethylamine, through the final separation, dehydration and fractionation, pure triethylamine is obtained.
- It can be used to reduce the alkali in the reaction.
- Alkylation reaction
- Oxidation reaction
Triethylamine can affect you when inhaled and by passing through the skin.
- Contact can severely irritate and bum the skin and eyes with possible eye damage.
- Exposure can irritate the eyes, nose and throat.
- Inhaling Triethylamine can irritate the lungs. Higher exposures may cause a build-up of fluid in the lungs (pulmonary edema), a medical mergency.
- Triethylamine may cause a skin allergy.
- Triethylamine may affect the liver and kidneys.
- Triethylamine is a flammable liquid and a dangerous fire hazard.
Oral-rat LD50: 460 mg/kg; Oral-Mouse LD50: 546 mg/kg
Eyes-rabbit 250 mg severe
Explosive hazardous characteristics
Mixed with air can be explosive
Flammability hazard characteristics
In case of fire, high temperature, oxidant, it is flammable, combustion produces toxic fumes of nitrogen oxides
Treasury ventilation low-temperature drying, stored separately from oxidants, acids
Dry, dry sand, carbon dioxide, foam
TWA 40 mg/cubic meter
Triethylamine is a colorless liquid. Strong ammonia odor.
Colorless to yellowish liquid; fishy aroma.
Clear, colorless to light yellow flammable liquid with a strong, penetrating, ammonia-like odor. Experimentally determined detection and recognition odor threshold concentrations were <400 μg/m3 (<100 ppbv) and 1.1 mg/m3 (270 ppbv), respectively (Hellman and Small, 1974). An odor threshold concentration of 0.032 ppbv was determined by a triangular odor bag method (Nagata and Takeuchi, 1990).
Catalytic solvent in chemical synthesis; accelerator activators for rubber; wetting, penetrating, and waterproofing agents of quaternary ammonium types; curing and hardening of polymers (e.g., corebinding resins); corrosion inhibitor; propellant.
ChEBI: A tertiary amine that is ammonia in which each hydrogen atom is substituted by an ethyl group.
Triethylamine is prepared by a vapor phase reaction of ammonia with ethanol or reaction of N,N-diethylacetamide with lithium aluminum hydride (Windholz et al 1983). It may also be produced from ethyl chloride and ammonia under heat and pressure (Hawley 1981) or by vapor phase alkylation of ammonia with ethanol (HSDB 1988). U.S. production is estimated at greater than 22,000 tons in 1972 (HSDB 1988).
Aroma threshold values
High strength odor, fishy type; recommend smelling in a 0.01% solution or less.
A clear colorless liquid with a strong ammonia to fish-like odor. Flash point 20°F. Vapors irritate the eyes and mucous membranes. Less dense (6.1 lb / gal) than water. Vapors heavier than air. Produces toxic oxides of nitrogen when burned.
Triethylamine reacts violently with oxidizing agents. Reacts with Al and Zn. Neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.
Vapors irritate nose, throat, and lungs, causing coughing, choking, and difficult breathing. Contact with eyes causes severe burns. Clothing wet with chemical causes skin burns.
Eye irritation and corneal edema have been reported from exposures in industry (Beard and Noe, 1981; Akesson et al 1985). Triethylamine may also be irritating to skin and mucous membranes (Windholz et al 1983).
Flammable/combustible material. May be ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
Triethylamine is used as an anti-livering agent for urea- and melamine-based enamels and in the recovery of gelled paint vehicles (HSDB 1988). It is also used as a catalyst for polyurethane foams, a flux for copper soldering, and as a catalytic solvent in chemical synthesis (Hawley 1981). Triethylamine is used in accelerating activators for rubber; as a corrosion inhibitor for polymers; a propellant; wetting, penetrating, and waterproofing agent of quaternary ammonium compounds; in curing and hardening of polymers (i.e. core-binding resins); and as a catalyst for epoxy resins (Hamilton and Hardy, 1974).
Moderately toxic by ingestion and skin contact. Mildly toxic by inhalation. Human systemic effects: visual field changes. Experimental reproductive effects. Mutation data reported. A skin and severe eye irritant. Can cause kidney and liver damage. A very dangerous fire hazard when exposed to heat, flame, or oxidizers. Explosive in the form of vapor when exposed to heat or flame. Complex with dinitrogen tetraoxide explodes below 0°C when undduted with solvent. Exothermic reaction with maleic anhydride above 150°C. Can react with oxidzing materials. Incompatible with N2O4. To fight fire, use CO2, dry chemical, alcohol foam. When heated to decomposition it emits toxic fumes of NOx.
Triethylamine is and aliphatic amine used as a solvent; corrosion inhibitor; in chemical synthesis; and accelerator activators; paint remover; base in methylene chloride or other chlorinated solvents. TEA is used to solubilize 2,4,5-T in water and serves as a selective extractant in the purification of antibiotics. It is used to manufacture quaternary ammonia compounds and octadecyloxymethyltriethylammonium chloride; an agent used in textile treatment.
Photolytic. Low et al. (1991) reported that the photooxidation of aqueous tertiary amine
solutions by UV light in the presence of titanium dioxide resulted in the formation of ammonium
and nitrate ions.
Chemical/Physical. Triethylamine reacted with NOx in the dark to form diethylnitrosamine. In an outdoor chamber, photooxidation by natural sunlight yielded the following products: diethylnitramine, diethylformamide, diethylacetamide, ethylacetamide, diethylhydroxylamine, ozone, acetaldehyde, and peroxyacetyl nitrate (Pitts et al., 1978).
There have been few studies on the metabolism of industrially important aliphatic amines such as triethylamine. It is generally assumed that amines not normally present in the body are metabolized by monoamine oxidase and diamine oxidase (histaminase).
Ultimately ammonia is formed and will be converted to urea. The hydrogen peroxide formed is acted upon by catalase and the aldehyde formed is thought to be converted to the corresponding carboxylic acid by the action of aldehyde oxidase (Beard and Noe 1981).
UN1296 Triethylamine, Hazard Class: 3; Labels: 3-Flammable liquid, 8-Corrosive material.
Dry triethylamine with CaSO4, LiAlH4, Linde type 4A molecular sieves, CaH2, KOH, or K2CO3, then distil it, either alone or from BaO, sodium, P2O5 or CaH2. It has also been distilled from zinc dust, under nitrogen. To remove traces of primary and secondary amines, triethylamine has been refluxed with acetic anhydride, benzoic anhydride, phthalic anhydride, then distilled, refluxed with CaH2 (ammonia-free) or KOH (or dried with activated alumina), and again distilled. Another purification method involved refluxing for 2hours with p-toluenesulfonyl chloride, then distilling. Grovenstein and Williams [J Am Chem Soc 83 412 1961] treated triethylamine (500mL) with benzoyl chloride (30mL), filtered off the precipitate, and refluxed the liquid for 1hour with a further 30mL of benzoyl chloride. After cooling, the liquid was filtered, distilled, and allowed to stand for several hours with KOH pellets. It was then refluxed with, and distilled from, stirred molten potassium. Triethylamine has been converted to its hydrochloride (see brlow), crystallised from EtOH (to m 254o), then liberated with aqueous NaOH, dried with solid KOH and distilled from sodium under N2. [Beilstein 4 H 99, 4 I 348, 4 II 593, 4 III 194, 4 IV 322.]
A strong base. Violent reaction with strong acids; halogenated compounds; and strong oxidizers. Attacks some forms of plastics, rubber and coatings. Corrosive to aluminum, zinc, copper, and their alloys in the presence of moisture. Reaction with nitrosating agents (e.g., nitrites, nitrous gases, and nitrous acid) capable of releasing carcinogenic nitrosamines.
Controlled incineration (incinerator equipped with a scrubber or thermal unit to reduce nitrogen oxides emissions).
Triethylamine Preparation Products And Raw materials
- Products Intro
Purity:98% Package:25kg 5KG;1KG
- Products Intro
- Product Name:Triethylamine
Purity:Standard for GC,>=99.5%(GC) Package:5ml
- +1 416 493 6870
- Products Intro
- Product Name:Triethylamine
- 021-58432009 / 400-005-6266
- Products Intro
- Product Name:TriethylaMine
Purity:99.5%,for HPLC Package:500Ml
- Products Intro
- Product Name:Triethylamine
- ALIZARIN COMPLEXONE
- Thymolphthalein Complexone
- ETHYLENEDIAMINE-N,N'-DIACETIC-N,N'-DIPROPIONIC ACID
- DIETHYLALUMINUM CHLORIDE