- Product Name:
- LABOTEST-BB LTBB000485
- META AMINO PHENOL
- Product Categories:
- Pyridines ,Halogenated Heterocycles
- Organic Building Blocks
- AM to AQChemical Class
- Oxygen Compounds
- Aromatic Phenols
- API intermediates
- Organic Chemicals
- Alpha sort
- Anilines, Aromatic Amines and Nitro Compounds
- Phenoles and thiophenoles
- Mol File:
3-Aminophenol Chemical Properties
- Melting point:
- 121 °C
- Boiling point:
- 164 °C11 mm Hg(lit.)
- refractive index
- 1.5444 (estimate)
- Flash point:
- 155 °C
- storage temp.
- Crystalline Powder
- Colour Index
- 4.37, 9.82(at 20℃)
- White to pinkish or light gray
- 6.8 (10g/l, H2O, 20℃)
- Water Solubility
- 35 g/L (20 ºC)
- Stable. Combustible. Incompatible with strong oxidizing agents, bases, mineral acids. May be light or air-sensitive.
- CAS DataBase Reference
- 591-27-5(CAS DataBase Reference)
- NIST Chemistry Reference
- Phenol, 3-amino-(591-27-5)
- EPA Substance Registry System
- 3-Aminophenol (591-27-5)
- Hazard Codes
- Risk Statements
- Safety Statements
- UN 2512 6.1/PG 3
- WGK Germany
- HS Code
- Hazardous Substances Data
- 591-27-5(Hazardous Substances Data)
- LD50 i.p. in mice: 4.5 mg/20g (Koelzer, Giesen)
3-Aminophenol Usage And Synthesis
Light grey crystal powder
o-Aminophenol appears as colorless needles or as white crystalline substance turning tan to brown on exposure to air.
m-Aminophenol (MAP) is an important starting material for dyes, including a variety of leuco (or latent) dyes used in imaging technology, optical bleaches and fluorescent agents, drugs, agricultural chemicals; and high-performance polymers. Although the synthesis of m-aminophenol(s) by the reaction of resorcinol with ammonia or (di)alkylarnines has been known for about 100 years,the preferred manufacturing process had been for many years a route involving the sulfonation of nitrobenzene to m-nitrobenzenesulfonic acid, the reduction of the nitro group to give m-aminobenzenesulfonic acid, followed by the caustic fusion of sodium m-aminobenzenesulfonate to yield sodium m-aminophenolate. The m-aminophenol was isolated/purified by neutralization, filtration, and recrystallization; the overall yield of m-aminophenol from nitrobenzene was estimated by SRI International to be 58%. (Doubtless, process improvements were made by the producers using this process.) The nitrobenzene/sulfonationlreductionlcaustic fusion route is still being used commercially, notably by ACNA in Italy, the largest producer of MAP, as well as a few smaller manufacturers. Sumitomo Chemical Co. used this process as well into the early 1980s and had licensed their knowhow to Hindustani Organic Chemicals, Ltd. of India which started up a plant on this basis with a capacity for MAP of 1.5 mill. lb /yr in 1970.The output of the Indian plant was said to be devoted to making sodium p-aminosalycilate (PAS), a tuberculostatic agent.
coupler for hair dyes; dye intermediate; in the manufacturing of 4-aminosalicylic acid
Dye intermediate, manufacture of p-aminosalicylic acid.
ChEBI: An aminophenol that is one of three amino derivatives of phenol which has the single amino substituent located meta to the phenolic -OH group.
Tetrahedron Letters, 25, p. 1479, 1984 DOI: 10.1016/S0040-4039(01)80191-X
White crystals or off-white flakes.
Air & Water Reactions
3-Aminophenol may be sensitive to prolonged exposure to air and light. Slightly soluble in water.
3-Aminophenol may react with strong oxidizers and mineral acids or bases.
Toxic by ingestion.
Flash point data for 3-Aminophenol are not available. 3-Aminophenol is probably combustible.
Poison by ingestion, subcutaneous, and intraperitoneal routes. An experimental teratogen. Other experimental reproductive effects. Mutation data reported. A skin and eye irritant. When heated to decomposition it emits toxic fumes of NOx,.
Workers may be exposed to oAminophenol during its use as a chemical intermediate; in the manufacture of azo and sulfur dyes; and in the photographic industry. There is potential for consumer exposure to o-Aminophenol because of its use in dyeing hair, fur, and leather. The compound is a constituent of 75 registered cosmetic products suggesting the potential for widespread consumer exposure. p-Aminophenol is used mainly as a dye, dye intermediate and as a photographic developer; and in small quantities in analgesic drug preparation. Consumer exposure to p-aminophenol may occur from use as a hairdye or as a component in cosmetic preparations. mAminophenol is used mainly as a dye intermediate
UN2512 Aminophenols (o-; m-; p-), Hazard Class: 6.1; Labels: 6.1-Poisonous materials
Crystallise it from hot water or toluene. [Beilstein 13 IV 952.]
These phenol/cresol materials can react with oxidizers; reaction may be violent. Incompatible with strong reducing substances such as alkali metals, hydrides, nitrides, and sulfides. Flammable gas (H2) may be generated, and the heat of the reaction may cause the gas to ignite and explode. Heat may be generated by the acidbase reaction with bases; such heating may initiate polymerization of the organic compound. Reacts with boranes, alkalies, aliphatic amines, amides, nitric acid, sulfuric acid. Phenols are sulfonated very readily (e.g., by concentrated sulfuric acid at room temperature). These reactions generate heat. Phenols are also nitrated very rapidly, even by dilute nitric acid and can explode when heated. Many phenols form metal salts that may be detonated by mild shock.
Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.
3-Aminophenol Preparation Products And Raw materials
- Please Send Email QQ:18652950785
- 027-87290866- ;027-87290866
- 010-82848833- ;010-82848833-
- 3-METHOXYPHENYL ISOCYANATE
- 6-NITROPIPERONYL ALCOHOL
- Metanilic acid