Ferrocene Property

Melting point:

172-174 °C (lit.)

Boiling point:

249 °C (lit.)

Density 

1.490

vapor pressure 

0.03 mm Hg ( 40 °C)

Flash point:

100°C

storage temp. 

Store below +30°C.

solubility 

insoluble in H2O; soluble in ethanol, ethyl ether,benzene, dilute HNO 3

form 

crystal

color 

orange

Water Solubility 

practically insoluble

Sensitive 

Air & Moisture Sensitive

Sublimation 

100 ºC

Merck 

14,4037

Exposure limits

ACGIH: TWA 10 mg/m3; TWA 1 mg/m3
OSHA: TWA 15 mg/m3; TWA 5 mg/m3
NIOSH: TWA 10 mg/m3; TWA 5 mg/m3; TWA 1 mg/m3

Stability:

Stable at room temperature. Incompatible with strong oxidizing agents. Highly flammable.

LogP

3.711 at 22℃

CAS DataBase Reference

102-54-5(CAS DataBase Reference)

NIST Chemistry Reference

Ferrocene(102-54-5)

EPA Substance Registry System

Ferrocene (102-54-5)

Safety

Hazard Codes 

F,Xn,N

Risk Statements 

11-22-51/53-2017/11/22

Safety Statements 

61-22-24/25

RIDADR 

UN 1325 4.1/PG 2

OEB

B

OEL

TWA: 10 mg/m3 (total)

WGK Germany 

2

RTECS 

LK0700000

Autoignition Temperature

>150 °C

TSCA 

Yes

HazardClass 

4.1

PackingGroup 

II

HS Code 

29310095

Hazardous Substances Data

102-54-5(Hazardous Substances Data)

Toxicity

LD50 orally in Rabbit: 1320 mg/kg LD50 dermal Rat > 3000 mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H228Flammable solid

H373May cause damage to organs through prolonged or repeated exposure

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P202Do not handle until all safety precautions have been read and understood.

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P273Avoid release to the environment.

P301+P312IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.

P308+P313IF exposed or concerned: Get medical advice/attention.

Ferrocene Chemical Properties,Usage,Production

Organic transition metal

Ferrocene is an organic transition metal compound that has aromatic properties and is also known as dicyclopentadienyl iron. Its molecular structure contains a divalent iron cation and two cyclopentadienyl anions. It is used as a raw material in the production of ferrocenecarboxylic acid and was first successfully produced in the 1950s by reacting cyclopentadienyl magnesium bromide with anhydrous ferric chloride. Ferrocene is a non-polar compound that appears as an orange needle crystal powder with a camphor-like smell at room temperature. It is soluble in many organic solvents, including methanol, ethanol, ethyl ether, petroleum ether, gasoline, kerosene, diesel oil, methylene chloride, benzene, toluene, and xylene. Ferrocene has a molecule with polarity, high thermal stability, chemical stability, and radiation resistance, making it useful in industry, agriculture, medicine, aerospace, energy, environmental protection, and other fields.

Chemical Properties

Ferrocene is a crystal with orange needle-like structure that sublimates at temperatures higher than 100℃ and melts at 172.5-173℃. Its boiling point is 249℃. It is soluble in dilute nitric acid, concentrated sulfuric acid, benzene, ether, petroleum ether and tetrahydrofuran and generates bluish fluorescence-containing deep red solution in dilute nitric acid and concentrated sulfuric acid. It is insoluble in water, 10% sodium hydroxide and hot concentrated hydrochloric acid, and it remains stable in air. Ferrocene has a strong property of UV absorbing and great thermostability, withstanding heating up to 470℃. It has a camphor-like scent and can be evaporated with water vapor. Ferrocene is neither dissolved nor decomposed in boiling solutions of these solvents.

Uses

Ferrocene and its derivatives have various applications in different fields. It can be used as additives in rocket fuel, antiknock agent in gasoline, curing agent in rubber and silicone resin, and ultraviolet absorber. It can also be used in the production of metal-containing polymers and as a coating material for spacecraft. Ferrocene has a smoke abatement and combustion facilitating effect, which can reduce smoke production and increase power efficiency in fuel. It can also be used as an iron fertilizer for plants and as a pesticide. Ferrocene derivatives have applications as antioxidants, stabilizers, catalysts, and promoting agents in different industrial and organic synthesis processes. Addition of ferrocene to fuels such as diesel, gasoline, heavy oil, and coal can decrease the fuel consumption rate and reduce smoke production. Overall, ferrocene has unique characteristics that make it suitable for various applications in different fields.

Category

toxic substances

Toxicity grading

poisoning

Acute toxicity

Oral-rat LD50: 1320 mg/kg; Oral-Mouse LD50: 832 mg/kg.

Flammability and hazard characteristics

flammable with the combustion generating iron-containing acrid smoke

Storage properties

warehouse: ventilated, low temperature and dry; Store it separately from oxidants.

Extinguishing agent

Water, carbon dioxide, dry, sandy soil.

Professional standards

TWA 10 mg/m³; STEL 20 mg/m3

Description

Ferrocene, a metallocene, is a bright orangesalt-like crystals from alcohol with a camphor odor.Molecular weight = 186.05; Boiling point = 249 C (sublimes); Freezing/Melting point = 173 C. Decomposes at465 C. Hazard Identification (based on NFPA-704 MRating System): Health 2, Flammability 2, Reactivity 1.Insoluble in water.

Chemical Properties

Orange, crystalline solid; camphor-like odor. Insoluble in water; soluble in benzene, ether, and alcohol. Iron content 29.4–30.6%.

Chemical Properties

Ferrocene, a metallocene, is a bright orange salt-like crystals from alcohol. Camphor odor.

Physical properties

Orange crystals; camphor-like odor; melts at 172.5°C; vaporizes at 249°C; sublimes above 100°C; thermally stable above 500°C; insoluble in water; soluble in alcohol, ether and benzene; also soluble in dilute nitric acid and concentrated sulfuric acid forming a deep red solution that fluoresces.

Uses

Ferrocene is used as a catalyst for vulcanization, acceleration, and polymerization, as a chemical intermediate for polymeric compounds such as high temperature polymers, as an antiknock additive for gasoline, as a coating for missiles and satellites, and as a high-temperature lubricant.

Uses

Antiknock additive for gasoline; catalyst.

Uses

In ultraviolet stabilizers and smoke depressants for polymers; to increase the burn rate of rocket propellants; to prevent erosion of space capsule shields; to improve the viscosity of lubricants; to catalyze polymerization reactions; to catalyze combustion; some derivatives used as hematinic agents

Preparation

Dicyclopentadienyliron may be obtained in a single-step synthetic route by heating cyclopentadiene with iron or iron pentacarbonyl at 300°C:
2C₅H₅ + Fe → (C₅H₅)₂Fe
Also, it can be prepared by the reaction of iron(II) chloride with cyclopentadiene in the presence of an alkyl amine or a similar base.
Another convenient method of preparing this π-complex of iron is a twostep process in which the first step involves preparation of cyclopentadienyl Grignard reagent, such as 2,4-cyclopentadienylmagnesium bromide C5H5MgBr which may then be combined with ferric chloride to yield dicyclopentadienyl iron:
3C₅H₅MgBr + FeCl₃ → (C₅H₅)₂Fe + 3MgBrCl
Another general method of preparation involves the reaction of cyclopentadiene with sodium metal or sodium hydride in tetrahydrofuran (THF). Addition of iron(II) chloride to this solution forms the complex dicyclopentadienyliron:
2C₅H₆ + 2Na → 2C₅H₅ˉ + 2Na+ + H₂
In 3:2 molar ratio of cyclopentadiene to sodium cyclopentene is obtained along with cyclopentadienidide (C₅H₅ˉ ) anion:
3C₅H₆ + 2Na → 2C5H5¯ + 2Na+ + C₅H₈
FeCl₂ + 2C5H₆Na → (C5H5)₂Fe + 2NaCl

Definition

ferrocene: An orange-red crystallinesolid, Fe(C₅H₅)₂; m.p. 173°C. Itcan be made by adding the ioniccompound Na₊C₅H₅^- (cyclopentadienylsodium, made from sodium andcyclopentadiene) to iron(III) chloride.In ferrocene, the two rings are parallel,with the iron ion sandwiched betweenthem (hence the namesandwich compound: see formula).The bonding is between pi orbitalson the rings and d-orbitals on theFe²⁺ ion. The compound can undergoelectrophilic substitution on theC₅H₅rings (they have some aromatic character).It can also be oxidized to theblue ion (C₅H₅)₂Fe⁺. Ferrocene is the first of a class of similar complexescalled sandwich compounds. Its systematicname is di-π-cyclopentadienyliron(II).

Production Methods

Ferrocene is produced from the reaction of cyclopentadiene with reduced iron in the presence of metal oxides. There is also a two-stage production process in which produced iron (II)oxide (stage 1) is reacted with cyclopentadiene.

Definition

A coordination compound of ferrous iron and two molecules of cyclopentadiene in which the organic portions have typically aromatic chemical properties. Its activity is intermediate between phenol and anisole. The first compound shown to have the “sandwich

General Description

Orange crystalline solid or orange-yellow powder. Sublimes above 212°F. Camphor odor.

Air & Water Reactions

Sensitive to prolonged exposure to air and may be sensitive to light. Insoluble in water.

Reactivity Profile

Ferrocene reacts violently with tetranitromethane. . Contact of tetranitromethane with Ferrocene under various conditions leads to violent explosion, [Trans. Met. Chem., 1979, 4, 207-208].

Hazard

Moderate fire risk. Evolves toxic products on decomposition and heating.

Health Hazard

Dicyclopentadienyl iron causes changes in blood parameters and hepatic cirrhosis.
The toxicological properties of dicyclopentadienyl iron have not been extensively investigated. However, it has been used as a preventive and therapeutic iron deficiency drug, and its utilization is listed as tolerable.

Fire Hazard

Flash point data for Ferrocene are not available. Ferrocene is probably combustible.

Flammability and Explosibility

Highly flammable

Safety Profile

Poison by intraperitoneal and intravenous routes. Moderately toxic by ingestion. Questionable carcinogen with experimental tumorigenic data. Mutation data reported. Flammable; reacts violently with NH4ClO4. When heated to decomposition it emits acrid smoke and irritating fumes.

Potential Exposure

Used as additive in fuel oil; antiknock agent in gasoline fuel; used in making rubber, silicone resins, high-temperature polymers and lubricants; interme diate for high-temperature polymers; as a smoke suppres sant and catalyst

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.

Carcinogenicity

Ferrocene was administered by intramuscular injection at a dose of 5175 mg/kg/2 years. By the criterion established by the Registry of Toxic Effects of Chemical Substances (RTECS), ferrocene was an equivocal tumorigenic agent and tumors were most evident at the site of multiple injections.

storage

Color Code—Red: Flammability Hazard: Store ina flammable materials storage area. Prior to working withthis chemical you should be trained on its proper handlingand storage. Store in tightly closed containers in a cool,well-ventilated area away from oxidizers, ammonium perchlorate, tetranitromethane, mercury(II) nitrate, and heat.Sources of ignition, such as smoking and open flames, areprohibited where this chemical is used, handled, or stored ina manner that could create a potential fire or explosionhazard.

Shipping

UN1325 Flammable solids, organic, n.o.s., Hazard Class: 4.1; Labels: 4.1-Flammable solid.

Purification Methods

Purify it by crystallisation from pentane or cyclohexane (also *C6H6 or MeOH can be used). It is moderately soluble in Et2O and sublimes readily above 100o. Crystallisation from EtOH gave material m 172.5-173o. [Wilkinson Org Synth Coll Vol IV 473 1963, Miller J Chem Soc 632 1952.] It has also been crystallised from methanol and sublimed in vacuo. [Saltiel et al. J Am Chem Soc 109 1209 1987, Beilstein 16 IV 1783.]

Structure and conformation

X-ray diffraction studies show that in crystalline ferrocene (and in its substituted derivatives) the iron atom is "sandwiched" between the two cyclopentadienyl rings, these rings having the staggered configuration relative to each other (Fig. 16). The rings are parallel plane regular pentagons, all the C-C and Fe-C distances being equal. Electron diffraction studies show, however, that ferrocene has the eclipsed configuration in the vapour state.

Incompatibilities

Violent reaction with ammonium per chlorate, tetranitromethane, mercury(II) nitrate. Incompa tible with oxidizers (chlorates, nitrates, peroxides, perman ganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides.
Peroxomonosulfuric acid. Decomposes @≧465 ℃.