tert-Butyllithium Property

Boiling point:

36-40 °C

Density 

0.69 g/mL at 20 °C

vapor density 

~3 (vs air)

Flash point:

20 °F

storage temp. 

2-8°C

form 

liquid

color 

slightly cloudy

Sensitive 

Air & Moisture Sensitive

BRN 

3587204

Exposure limits

ACGIH: TWA 1000 ppm
OSHA: TWA 1000 ppm(2950 mg/m3)
NIOSH: IDLH 1500 ppm; TWA 120 ppm(350 mg/m3); Ceiling 610 ppm(1800 mg/m3)

InChIKey

BKDLGMUIXWPYGD-UHFFFAOYSA-N

CAS DataBase Reference

594-19-4(CAS DataBase Reference)

EPA Substance Registry System

Lithium, (1,1-dimethylethyl)- (594-19-4)

Safety

Hazard Codes 

F,C,N

Risk Statements 

11-15-17-34-51/53-65-66-67-50/53-38-14/15

Safety Statements 

26-36/37/39-43-45-62-61-16-33-9

RIDADR 

UN 3394 4.2/PG 1

WGK Germany 

1

F 

3-10

TSCA 

Yes

HazardClass 

4.3

PackingGroup 

I

HS Code 

29319090

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H225Highly Flammable liquid and vapour

H250Catches fire spontaneously if exposed to air

H252Self-heating in large quantities; may catch fire

H260In contact with water releases flammable gases which may ignite spontaneously

H304May be fatal if swallowed and enters airways

H314Causes severe skin burns and eye damage

H318Causes serious eye damage

H336May cause drowsiness or dizziness

H410Very toxic to aquatic life with long lasting effects

H411Toxic to aquatic life with long lasting effects

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P222Do not allow contact with air.

P223Keep away from any possible contact with water, because of violent reaction and possible flash fire.

P231+P232Handle under inert gas. Protect from moisture.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P370+P378In case of fire: Use … for extinction.

P405Store locked up.

P422Store contents under …

tert-Butyllithium Chemical Properties,Usage,Production

Description

tert-Butyllithium solution (tert-BuLi) is an organolithium compound, used as a strong base in organic chemistry. It facilitates lithium-halogen exchange reaction and also can be employed in the deprotonation of C-H compounds and amines. it has applications in organic synthesis since it is a strong base, capable of deprotonating many carbon molecules, including benzene. tert-Butyllithium is available commercially as hydrocarbon solutions; it is not usually prepared in the laboratory. Its synthesis was first reported by R. B. Woodward in 1941.

Chemical Properties

tert-Butyllithium is a colorless crystalline solid or colourless to pale yellow solution. It is more reactive than n- or sec-butyllithium and has similar properties. However, it is thermally stable. Dixon and co-workers have heated tert-Butyllithium to 100°C for 20 hr with little decomposition.

Uses

• There are no commercial uses of t-butyllithium, but it is used as a polymerization initiator and as a metalating agent in the laboratory.
• Alkylating and metalating agent. Reagent for the introduction of the tert-butyl group.
• tert-Butyllithium (t-BuLi) is the most reactive of the commercially available organolithium reagents. It is supplied as a standard solution in hydrocarbon solvents, usually in a bottle sealed with a septum.

Preparation

tert-Butyllithium is not sold in large quantities. The industrial and laboratory preparations are the same: the reaction of t-butyl chloride with lithium metal in a hydrocarbon solvent. However, tert-Butyllithium is much more difficult to produce than the other isomeric butyllithium compounds and some special precautions must be taken to obtain good yields. Principally, the lithium metal must be finely divided and must contain several percent sodium. It has also been found that t-butyl alcohol in the butyl chloride is beneficial. The solvent of choice is pentane. Vigorous reflux is necessary for good yield since it apparently helps to remove lithium chloride from the surface of the metal, and pentane refluxes at about the optimum temperature. If hexane is used at the same temperature, a significantly lower yield is obtained.

Application

tert-Butyllithium solution can be used as a strong base in the synthesis of:
Alkyllithium derivatives form alkyl iodides and diiodoalkanes by halogen-lithium exchange reaction.
Inorganic polymer [(LiMo3Se3)n] from [(InMo3Se3)n] by reductive intercalation method.
Adducts of cinnamic acid (1,3- and 1,4-adducts) by reacting with C-C double of cinnamic acid.