Costus oil Chemical Properties

Density 

1.002 g/mL at 25 °C(lit.)

refractive index 

n20/D 1.5180(lit.)

FEMA 

2336 | COSTUS ROOT OIL (SAUSSUREA LAPPA CLARKE )

Flash point:

120 °F

storage temp. 

2-8°C

Odor

at 100.00 %. orris green hairy woody unripe melons

Odor Type

animal

Major Application

pharmaceutical (small molecule)

Cosmetics Ingredients Functions

PERFUMING
FRAGRANCE

EPA Substance Registry System

Oils, costus (8023-88-9)

Safety Information

Safety Statements 

23-24/25

WGK Germany 

2

RTECS 

GN1775000

TSCA 

TSCA listed

Storage Class

3 - Flammable liquids

Hazard Classifications

Aquatic Chronic 2
Asp. Tox. 1
Eye Irrit. 2
Flam. Liq. 3
Skin Irrit. 2
Skin Sens. 1

Toxicity

LD50 oral in rat: 3400mg/kg

MSDS

• Language:English Provider:SigmaAldrich

Costus oil Usage And Synthesis

Chemical Properties

The oil is obtained in approximately 0.7% yields by steam distillation after maceration in water of the comminuted dried roots. Since the oil contains water-soluble components and has a specific gravity similar to that of water, it is subsequently recovered from the distillation waters by extraction with solvents. The oil has a characteristic persistent odor reminiscent of orris, violet and vetiver.

Physical properties

Costus oil is a viscous, pale-yellow to yellowish-brown liquid. It is soluble in most fixed oils and in mineral oil. It is insoluble in glycerin and propylene glycol.

Uses

Essential oil EP Reference standard, intended for use in laboratory tests only as specifically prescribed in the European Pharmacopoeia.

Definition

Extractives and their physically modified derivatives. Saussurea lappa, Compositae.

Essential oil composition

The main constituents include myrcene, p-cymene, l-limalool, β-ionone, sesquiterpenes, costolactone and a small amount of palmitic acid.

Synthesis

When the production of dry tuberous woodruff root raw products, net system, cut into 2 mm thick slices, take 300 g, placed in the pot, 150 ?? fried to the surface of the yellowish, removed and cooled, crushed, through a 20-mesh sieve, add 3 times the volume of methanol, soaking overnight at room temperature, loaded into the percolator cylinder, 10 times the volume of methanol at 10 ?? percolation extraction, percolation filtration, decompression recovery of methanol to the final volume of 200 ml or so, concentrated liquid Add 700 ml of distilled water to adjust the methanol content volume ratio of about 20%, extracted with ether, 2500 ml ?? 1, the extract was dried and filtered with anhydrous Na2SO4, hot water bath distillation and concentration, ice water condensation, recycling of ether, to the distillation of the container is still left about 100 mL of solution, stop the distillation, take out the residual solution, put in a fume hood in the volatile exhaust of ether, the residue is refined by molecular distillation. The residue was refined by molecular distillation, the distillation pressure was 0.13 mbar, the scraping rate was 200 r/min, the feed rate was 1.2 g/min, and the distillate was collected at 160 ?? or less, which was obtained as the wood fragrance oil.

Costus oil(8023-88-9)Related Product Information

• Tris(2,4-pentanedionato)chroMiuM(III)
• SALCOMINE
• Aluminum acetylacetonate
• N-BUTYLISOCYANIDE
• COBALT(II) ACETYLACETONATE
• Tosylmethyl isocyanide
• 1,1,3,3-TETRAMETHYLBUTYL ISOCYANIDE
• TRIS(2,2,6,6-TETRAMETHYL-3,5-HEPTANEDIONATO)EUROPIUM(III)
• TRIS(2,2,6,6-TETRAMETHYL-3,5-HEPTANEDIONATO)DYSPROSIUM(III)
• Ferric acetylacetonate
• PHENYLSELENOL
• Ethyl isocyanoacetate
• Cupric acetylacetonate
• DICHLORO(ETHYLENEDIAMINE)PLATINUM(II)
• 2,4-PENTANEDIONE, SILVER DERIVATIVE
• METHYL ISOCYANOACETATE
• Benzyl isocyanide
• TERT-BUTYL ISOCYANIDE