Malononitrile Property

Melting point:

30-32 °C (lit.)

Boiling point:

220 °C (lit.)

Density 

1.049 g/mL at 25 °C (lit.)

vapor pressure 

1 hPa (50 °C)

refractive index 

1.4150

Flash point:

234 °F

storage temp. 

2-8°C

solubility 

133g/l

pka

11(at 25℃)

form 

Crystalline Low Melting Mass

color 

White to yellow-brown

Specific Gravity

1.049

PH

pH : 4.5

Water Solubility 

13.3 g/100 mL (20 ºC)

Merck 

14,5711

BRN 

773697

Exposure limits

TLV-TWA 8 mg/m³ (3 ppm) (NIOSH).

Dielectric constant

46.0

InChIKey

CUONGYYJJVDODC-UHFFFAOYSA-N

CAS DataBase Reference

109-77-3(CAS DataBase Reference)

NIST Chemistry Reference

Malononitrile(109-77-3)

EPA Substance Registry System

Malononitrile (109-77-3)

Safety

Hazard Codes 

T,N

Risk Statements 

23/24/25-50/53

Safety Statements 

23-27-45-60-61

OEB

B

OEL

TWA: 3 ppm (8 mg/m3)

RIDADR 

UN 2647 6.1/PG 2

WGK Germany 

3

RTECS 

OO3150000

F 

8

Autoignition Temperature

365 °C

TSCA 

Yes

HazardClass 

6.1

PackingGroup 

II

HS Code 

29269090

Hazardous Substances Data

109-77-3(Hazardous Substances Data)

Toxicity

LD50 i.p. in mice: 12.9 mg/kg (Jones, Israel)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H300Fatal if swallowed

H317May cause an allergic skin reaction

H319Causes serious eye irritation

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Malononitrile Chemical Properties,Usage,Production

Description

Malonitrile, also known as Malononitrile, is an aliphatic nitrile that can release cyanide through chemical or biological transformation. It was also used decades ago for treating certain forms of mental illness.

Chemical Properties

Malononitrile is a white powder or colorless, odorless crystalline substance. It may polymerize violently on prolonged heating at 130°C or at lower temperatures on contact with strong bases.

Uses

Malononitrile is an important building block for the syntheses of pharmaceuticals (e.g. triamterene, adenine and methotrexate), thiamin (vitamin B1), pesticides dyestuffs for color photography and synthetic fibers (e.g. vinylidene cyanide). Product Data Sheet

Uses

The chemical properties of malononitrile are determined by the nucleophilicity of the malononitrile anion, formed by deprotonation with relatively weak bases and by the two electrophilic cyano groups.

Production Methods

Malononitrile can be synthesized by a continuous method where preheated acetonitrile and cyanogen chloride are introduced into a tube reactor until the reaction mixture reaches a temperature of about 780°C. Another way to prepare malononitrile is by reacting phosphorus pentachloride with cyanoacetamide, or by using phosphorus pentoxide to react with malonamide or cyanoacetamide.
DOI: 10.15227/orgsyn.010.0066

Definition

ChEBI: Malononitrile is a dinitrile that is methane substituted by two cyano groups. It is a dinitrile and an aliphatic nitrile.

General Description

A white-colored crystalline solid. Denser than water and soluble in water. Toxic by ingestion and may severely irritate skin and eyes. May polymerize violently if exposed to temperatures above 266°F. Used to make other chemicals.

Air & Water Reactions

Soluble in water.

Reactivity Profile

Malononitrile is a white, low-melting powder (m. p. 30.5° C), toxic, combustible. Violent polymerization on contact with strong bases (sodium hydroxide, potassium hydroxide) or when heated above 130° C. When stored at 70-80° C for 2 months, spontaneous explosion (decomposition) occurred [Bretherick, 5th ed., 1995, p. 394].

Hazard

Toxic by ingestion and inhalation.

Health Hazard

Malononitrile is a highly toxic compound by all toxic routes. Its acute toxicity is somewhat greater than that of the aliphatic mononitriles, propionitrile, and butyronitrile. The increased toxicity may be attributed to the greater degree of reactivity in the molecule arising from two- CN functional groups. The acute toxic symptoms in test animals have not been well documented. An intraperitoneal dose of 10 mg/kg was lethal to rats.
LD50 value, intravenous (rabbits): 28 mg/kg
LD50 value, oral (mice): 19 mg/kg
Malononitrile is an eye irritant. The irritation from 5 mg in 24 hours was severe in rabbits’ eyes. There is no report of teratogenic and carcinogenic action in animals or humans.

Fire Hazard

When heated to decomposition, Malononitrile emits highly toxic fumes (cyanide). May polymerize violently on prolonged heating. Avoid heat. Hazardous polymerization may occur, at prolonged heating at 266F or contact with strong bases at lower temperatures.

Industrial uses

Malononitrile is used primarily as an intermediate in the synthesis of drugs and vitamins (thiamine). It has also been employed in the manufacture of photosensitizes, acrylic fibers and dyestuffs and as an oil-soluble polar additive in lubricating oil.
Malononitrile was used formerly in treatment of various forms of mental illness such as alteration of psychic functions and schizophrenic disorders.

Safety Profile

Poison by ingestion, skin contact, subcutaneous, intravenous, and intraperitoneal routes. A severe eye irritant. Combustible when exposed to heat or flame. Polymerizes violently when heated to 130°C or on contact with strong base. May spontaneously explode when stored at 70-80°C. To fight fire, use water, fog, spray, foam. When heated to decomposition it emits toxic fumes of NOx and CN-. See also NITRILES.

Potential Exposure

Primary Irritant. Malononitrile is used in organic synthesis, as a lubricating oil additive, for thiamine synthesis, for pteridine-type anti-cancer agent synthesis, and in the synthesis of photosensitizers, acrylic fibers, and dyestuffs. It has also been used in the treatment of various forms of mental illness. It has been used as a leaching agent for gold.

First aid

If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit.

Environmental Fate

When heated to decomposition, nitriles may release cyanide. Malonitrile appears to decompose rapidly in contact with soil and sediment.

Metabolism

The in vitro metabolsim of malononitrile has been described by Stern et al. In the presence of thiosulphate, brain, liver and kidney slices metabolized malononitrile to thiocyanate. The formation of thiocyanate from malononitrile and thiosulphate was greatest in the presence of liver slices, lowest in brain, and intermediate with kidney slices. The liver enzyme system was saturated at a concentration of 3.3 mM malononitrile and a pH optimum of 7.0. This enzyme system was inhibited by cysteine and glutathione and inactivated by boiling. Stern et al indicated that thiosulphate increased cyanide and thiocyanate formed from malononitrile in tissue slices.

storage

Color Code—Blue: Health Hazard/Poison: Store in a secure poison location. Prior to working with this chemical you should be trained on its proper handling and storage. Store in a refrigerator under an inert atmosphere for prolonged storage. Keep away from strong bases. May polymerize violently on prolonged heating at 129℃ or in contact with strong bases at lower temperatures. May spontaneously explode on storing above 7080℃.

Shipping

This compound requires a shipping label of “POISONOUS/TOXIC MATERIALS.” It falls in Hazard Class 6.1 and Packing Group II.

Purification Methods

Crystallise the nitrile from water, EtOH, *benzene or chloroform. Distil it in a vacuum from, and store over, P2O5. [Bernasconi et al. J Am Chem Soc 107 7692 1985, Gratenhuis J Am Chem Soc 109 8044 1987, Beilstein 2 IV 1892.]

Toxicity evaluation

The acute toxicity of malonitrile and related alkyl nitriles is thought to be due to release of cyanide through metabolism of the parent compound. Signs of acute malonitrile intoxication including dyspnea, ataxia, and convulsions are similar to those noted with acute cyanide intoxication. The onset and duration indicate that these nitriles require metabolism to elicit toxicity. Cyanide and thiocyanate have both been found in urine and blood after malonitrile exposure.

Incompatibilities

Incompatible with strong bases. May polymerize violently on prolonged heating @ 129C, or in contact with strong bases at lower temperatures. Nitriles may polymerize in the presence of metals and some metal compounds. They are incompatible with acids; mixing nitriles with strong oxidizing acids can lead to extremely violent reactions. Nitriles are generally incompatible with other oxidizing agents such as peroxides and epoxides. The combination of bases and nitriles can produce hydrogen cyanide. Nitriles are hydrolyzed in both aqueous acid and base to give carboxylic acids (or salts of carboxylic acids). These reactions generate heat. Peroxides convert nitriles to amides. Nitriles can react vigorously with reducing agents. Acetonitrile and propionitrile are soluble in water, but nitriles higher than propionitrile have low aqueous solubility. They are also insoluble in aqueous acids.