tert-Butyl methyl ether Property

Melting point:

-110 °C

Boiling point:

55-56 °C(lit.)

Density 

0.7404

vapor density 

3.1 (vs air)

vapor pressure 

4.05 psi ( 20 °C)

refractive index 

n20/D 1.369(lit.)

Flash point:

-27 °F

storage temp. 

Store at +2°C to +25°C.

solubility 

42g/l

form 

Powder or Needles

color 

APHA: ≤10

Specific Gravity

0.740

Odor

Characteristic ethereal odor

Relative polarity

0.124

explosive limit

1.5-8.5%(V)

Water Solubility 

51 g/L (20 ºC)

FreezingPoint 

-108.6℃

λmax

λ: 210 nm Amax: 1.0
λ: 225 nm Amax: 0.50
λ: 250 nm Amax: 0.10
λ: 300-400 nm Amax: 0.005

Merck 

14,6032

BRN 

1730942

Dielectric constant

4.5

Exposure limits

ACGIH: TWA 50 ppm

Stability:

Stable, but may form explosive peroxides in contact with air. Extremely flammable - note low flash point. Incompatible with strong oxidizing agents.

InChIKey

BZLVMXJERCGZMT-UHFFFAOYSA-N

LogP

1.06 at 20℃

CAS DataBase Reference

1634-04-4(CAS DataBase Reference)

NIST Chemistry Reference

Propane, 2-methoxy-2-methyl-(1634-04-4)

IARC

3 (Vol. 73) 1999

EPA Substance Registry System

Methyl tert-butyl ether (1634-04-4)

Safety

Hazard Codes 

Xn,F,Xi,T

Risk Statements 

36/37/38-40-38-11-39/23/24/25-23/24/25

Safety Statements 

9-16-24-45-36/37-7

RIDADR 

UN 2398 3/PG 2

WGK Germany 

3

RTECS 

KN5250000

F 

3-10

Autoignition Temperature

705 °F

TSCA 

Yes

HS Code 

2909 19 90

HazardClass 

3

PackingGroup 

II

Hazardous Substances Data

1634-04-4(Hazardous Substances Data)

Toxicity

. LC50 in mice (15 min): 1.6 mmol/liter of atmosphere (Marsh)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H225Highly Flammable liquid and vapour

H315Causes skin irritation

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P233Keep container tightly closed.

P240Ground/bond container and receiving equipment.

P241Use explosion-proof electrical/ventilating/lighting/…/equipment.

P242Use only non-sparking tools.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

tert-Butyl methyl ether Chemical Properties,Usage,Production

Description

Methyl tert-butyl ether (MTBE) is a colorless liquid with a distinctive, disagreeable odor. It is made from blending chemicals such as isobutylene and methanol, and has been used since the 1980s as an additive for unleaded gasolines to achieve more efficient burning.MTBE is also used to dissolve gallstones. Patients treated in this way have MTBE delivered directly to their gall bladders through special tubes that are surgically inserted.

Chemical Properties

tert-Butyl methyl ether, also known as MTBE or Methyl tert-butyl ether, is a clear, colorless liquid with a low viscosity that is combustible and has a distinct, turpentine-like odor. It is miscible with organic solvents, but only slightly soluble in water. Methyl tert-butyl ether is very stable under alkaline, neutral, and weakly acidic conditions. In the presence of strong acids, it is cleaved to methanol and isobutene. Depending on reaction conditions the latter can form isobutene oligomers. MTBE does not undergo autoxidation and, in contrast to other ethers, it does not form peroxides with atmospheric oxygen. It improves the antiknock properties when added to motor gasoline.

History

tert-Butyl methyl ether was first synthesized (by the classical Williamson ether synthesis) and characterized in 1904. Extensive studies in the United States during World War II demonstrated the outstanding qualities of MTBE as a high-octane fuel component. It was first commercially produced in Italy in 1973 for use as an octane enhancer in gasoline. U.S. production of MTBE started in 1979 after Atlantic Richfield Co. (ARCO) was granted a waiver by the U.S. Environmental Protection Agency (EPA) that allowed MTBE to be blended up to 7 vol % in U.S. unleaded gasoline. The use of other aliphatic ethers was allowed when the U.S. EPA issued its “substantially similar” definition for unleaded gasoline specifications in 1981. Under this definition, any aliphatic ether or ether mixture could be blended in unleaded gasoline as long as the total oxygen contribution from the ethers does not exceed 2.0% oxygen by weight in the gasoline. This allowed MTBE to be blended up to approximately 11 vol % in gasoline.

Uses

Methyl tert-butyl ether (MTBE) was primarily used as a gasoline additive in unleaded gasoline in the United States prior to 2005, in the manufacture of isobutene, and as a chromatographic eluent especially in high pressure liquid chromatography. It is also a pharmaceutical agent and can be injected into the gallbladder to dissolve gallstones (ATSDR, 1996). tert-Butyl methyl ether is also used in the petrochemical industry. By reversal of its formation reaction, MTBE can be cracked to isobutene and methanol on acidic catalysts at higher temperature than MTBE synthesis.

Definition

ChEBI: Methyl tert-butyl ether is an ether having methyl and tert-butyl as the two alkyl components. It has a role as a non-polar solvent, a fuel additive and a metabolite.

Preparation

tert-butyl methyl ether can be prepared by the reaction of potassium tert-butoxide and bromomethane. Methyl tert-butyl ether also can be obtained by the acid-catalyzed addition of methanol to isobutene. Suitable catalysts are solid acids such as bentonites, zeolites and – commonly used in industrial world scale MTBE-production units – macroporous acidic ion-exchange resins. The reaction is weakly exothermic with a heat of reaction of -37.7 kJ/mol.

General Description

Methyl tert-butyl ether appears as a colorless liquid with a distinctive anesthetic-like odor. Vapors are heavier than air and narcotic (cause drowsiness when inhaled). This liquid has a flash point lower than most ambient temperatures, so it will readily ignite under most conditions. It is less dense than water and moderately soluble in water. Used as a octane booster in gasoline.

Air & Water Reactions

Highly flammable. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick 1979. p.151-154, 164]. A mixture of liquid air and diethyl ether exploded spontaneously [MCA Case History 616. 1960].

Reactivity Profile

Tert-Butyl methyl ether is a kind of Ethers, it form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.

Hazard

Tert-Butyl methyl ether is slightly toxic by ingestion and inhalation. Flammable when exposed to heat or flame. Upper respiratory tract irritant and kidney damage. Questionable carcinogen.

Health Hazard

INHALATION: May cause dizziness or suffocation. Contact may irritate or burn eyes or skin. May be harmful if swallowed.

Industrial uses

Methyl tert-butyl ether (MTBE) is used as an octane enhancer in gasoline. EPA regulations allow up to 2.7 wt.% oxygen in gasoline which allows 15 vol.% MTBE in gasoline. Other alkyl ethers can also be blended into gasoline up to the 2.7 wt% oxygen requirement. The stability of MTBE to oxidation and peroxide formation gives this unsymmetrical ether an advantage over other ethers in various extraction and reaction solvent applications.

Safety Profile

Poison by intravenous route. Slightly toxic by ingestion and inhalation. Flammable when exposed to heat or flame. When heated to decomposition it emits acrid smoke and irritating fumes. See also ETHERS.

Potential Exposure

Tert-Butyl methyl ether is used as an organic solvent; as an octane booster in unleaded gasolines; in making other chemicals; and in medicine to dissolve gall stones

First aid

If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. If this chemical has been inhaled, remove from exposure, begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if heart action has stopped. Transfer promptly to a medical facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce vomiting. Do not make an unconscious person vomit.

Carcinogenicity

EPA has not classified methyl tert-butyl ether with respect to potential carcinogenicity. There is evidence for the carcinogenicity of MTBE in animals. MTBE causes leukemias/lymphomas in female rats, renal tubular tumors and Leydig cell tumors in male rats, and hepatocellular tumors in mice. Positive animal carcinogenicity data and some further concordance in tumor sites for formaldehyde and TBA, metabolites of MTBE, provide support for this conclusion. However, uncertainties remain about the nature and extent of risk at very low doses, and about the particular tumor sites that are most relevant to humans.

Environmental Fate

tert-Butyl Methyl Ether can be released during manufacturing or blending with gasoline; during the storage, distribution, and transfer of MTBE-blended gasoline; and from spills or leaks or fugitive emissions at automotive service stations (U.S. EPA, 1994a). Vapor emissions from MTBE-blended gasoline may also contribute to atmospheric levels (U.S. EPA, 1988). It is not expected to persist in the atmosphere because it undergoes destruction from reactions with hydroxyl radicals. A total atmospheric lifetime for MTBE of approximately 3 and 6.1 days has been reported in polluted urban air and in nonpolluted rural air, respectively (U.S. EPA, 1993a). Based upon its vapor pressure and Henry s law constant, MTBE is highly volatile and would be expected to evaporate rapidly from soil surfaces or water. It may be fairly persistent when introduced into subsurface soils or to groundwater since volatilization to the atmosphere is reduced or eliminated. It does not readily degrade in surface waters due to hydrolysis or other abiotic processes. It is also resistant to biodegradation (U.S. EPA, 1993a). It is usually removed from surface waters very rapidly because of its high volatility. If released as part of a gasoline mixture from leaking underground storage tanks, its relatively high water solubility combined with little tendency to sorb to soil particles encourages migration to local groundwater supplies (U.S. EPA, 1993a).

Shipping

UN2398 Methyl tert-butyl ether, Hazard Class: 3; Labels: 3-Flammable liquid.

Purification Methods

Purify as for n-butyl methyl ether. [Beilstein 1 IV 1615.]

Incompatibilities

May form explosive mixture with air. May be able to form unstable peroxides. Much less likely to form peroxides than other ethers. Incompatible with strong acids. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. May accumulate static electrical charges, and cause ignition of its vapors.

Waste Disposal

Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed.