Ethyl chloroacetate Property

Melting point:

-26 °C (lit.)

Boiling point:

143 °C (lit.)

Density 

1.145 g/mL at 25 °C (lit.)

vapor density 

4.23 (vs air)

vapor pressure 

10 mm Hg ( 38 °C)

refractive index 

n20/D 1.421(lit.)

Flash point:

150 °F

storage temp. 

Store below +30°C.

solubility 

12.3g/l

form 

Liquid

color 

Clear colorless

Odor

Extremely irritating; fruity; pungent

explosive limit

2.6%(V)

Water Solubility 

20 g/L (20 ºC)

Merck 

14,3783

BRN 

506455

Dielectric constant

11.6（20℃）

Stability:

Stable. Incompatible with acids, bases, oxidizing agents, reducing agents. Flammable.

LogP

0.940

CAS DataBase Reference

105-39-5(CAS DataBase Reference)

NIST Chemistry Reference

Ethyl chloroacetate(105-39-5)

EPA Substance Registry System

Ethyl chloroacetate (105-39-5)

Safety

Hazard Codes 

T,N

Risk Statements 

23/24/25-50-10

Safety Statements 

45-61-7/9-16

RIDADR 

UN 1181 6.1/PG 2

WGK Germany 

2

RTECS 

AF9110000

Autoignition Temperature

452 °C

TSCA 

Yes

HS Code 

2915 40 00

HazardClass 

6.1

PackingGroup 

II

Hazardous Substances Data

105-39-5(Hazardous Substances Data)

Toxicity

LD50 orally in Rabbit: 180 mg/kg LD50 dermal Rat 161 mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H226Flammable liquid and vapour

H318Causes serious eye damage

H400Very toxic to aquatic life

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Ethyl chloroacetate Chemical Properties,Usage,Production

Description

Ethyl chloroacetate is a water-white liquidwith a pungent, fruity odor. Molecular weight = 122.56;Boiling point = 145℃. Freezing point = - 27℃; Flashpoint = 64℃. Hazard Identification (based on NFPA-704 MRating System): Health: 3, Flammability 3, Reactivity 0.Insoluble in water.

Chemical Properties

Ethyl chloroacetate is a colourless liquid with a pungent, fruity odor.Ethyl chloroacetate has a vapor pressure of 10mmHg at 38 °C (Lewis, 1997). It is insoluble in water, but miscible with alcohol, ether, and acetone (Lide, 1998); it is soluble in benzene (Lewis, 1997). Ethyl chloroacetate readily decomposes in hot water and alkalis (Lewis, 1997).

Uses

Ethyl chloroacetate is a reagent used in the preparation of 5 member heterocycles. It is used as pharmaceutical and organic intermediate. It is used as a solvent for organic synthesis and the production of pesticides (such as sodium fluoroacetate).

Preparation

Ethyl chloroacetate is synthesized by esterification of chloroacetic acid and ethanol under the catalysis of sulfuric acid. The reaction equation is as follows:
ClCH2COOH+C2H5OH[H2SO4]→ClCH2COOC2H5+H2O
Reaction: Add chloroacetic acid, ethanol and benzene into the esterification pot, turn on the stirrer, slowly add sulfuric acid, heat to reflux, continuously steam out the benzene-water azeotrope, and de-esterify the water generated by condensation and separator layering, Benzene is refluxed into the esterification pot, cooled and discharged when there is no more water to steam out, the crude ester is washed with saturated sodium bicarbonate solution and water to neutrality, dried with anhydrous calcium chloride, distilled, and collected The fraction at 144-146°C is the finished product of ethyl chloroacetate, the content is ≥99.0%, and the yield is 85%.

Synthesis Reference(s)

Tetrahedron, 23, p. 359, 1967 DOI: 10.1016/S0040-4020(01)83321-4

General Description

A clear colorless liquid with a pungent odor. Flash point 100°F. Denser than water and insoluble in water. Vapors heavier than air.

Air & Water Reactions

Highly flammable. Slow hydrolysis to acidic products will cause slow corrosion of common metals. No hazard involved. [USCG, 1999].

Reactivity Profile

Ethyl chloroacetate is a chlorinated ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides.

Hazard

Strong irritant to eyes.

Health Hazard

Inhalation causes irritation of mucous membrane, headache, and nausea. Contact with liquid causes extreme eye irritation and conjunctivitis; irritates skin if not removed at once. Ingestion causes irritation of mouth and stomach.

Fire Hazard

Special Hazards of Combustion Products: Irritating, toxic hydrogen chloride and phosgene may be generated in fires.

Chemical Reactivity

Reactivity with Water Very slow, not hazardous; Reactivity with Common Materials: Slow hydrolysis to acidic products; Stability During Transport: Stable; Neutralizing Agents for Acids and Caustics: Not pertinent; Polymerization: Not pertinent; Inhibitor of Polymerization: Not pertinent.

Safety Profile

oison by skin contact and subcutaneous routes. A severe eye irritant. Questionable carcinogen with experimental neoplastigenic data.Flammable liquid; a dangerous fire hazard when exposed to heat or flame; can react vigorously with oxidizing materials. Will react with water or steam to produce toxic and corrosive fumes. Vigorous reaction with sodium cyanide. To fight fire, use water, foam, CO2, dry chemical. When heated to decomposition it emits highly toxic fumes of cl-.

Potential Exposure

Used to make rodenticides, dyes, and other chemicals. Also used as a military poison

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.Medical observation is recommended for 24- 48 h afterbreathing overexposure, as pulmonary edema may bedelayed. As first aid for pulmonary edema, a doctor orauthorized paramedic may consider administering a corticosteroid spray

storage

(1) Color Code—Red: Flammability Hazard: Storein a flammable liquid storage area or approved cabinetaway from ignition sources and corrosive and reactivematerials. (2) Color Code—Blue: Health Hazard/Poison:Store in a secure poison location. Prior to working with thischemical you should be trained on its proper handling andstorage. Store in tightly closed containers in a cool, wellventilated area away from oxidizers, strong acids, strongbases, reducing agents, heat, and sources of ignition. Wherepossible, automatically pump liquid from drums or otherstorage containers to process containers. Drums must beequipped with self-closing valves, pressure vacuum bungs,and flame arresters. Use only nonsparking tools and equipment, especially when opening and closing containers ofthis chemical. Sources of ignition, such as smoking andopen flames, are prohibited where this chemical is used,handled, or stored in a manner that could create a potentialfire or explosion hazard. Wherever this chemical is used,handled, manufactured, or stored, use explosion-proof electrical equipment and fittings.

Shipping

UN1181 Ethylchloroacetate, Hazard class: 6.1; Labels: 6.1-Poisonous materials, 3-Flammable liquid.

Purification Methods

Shake the ester with satutated aqueous Na2CO3 (three times), aqueous 50% CaCl2 (three times) and saturated aqueous NaCl (twice). Dry it with Na2SO4 or MgSO4 and distil it. [Beilstein 2 IV 481.] LACHRYMATORY.

Incompatibilities

May form explosive mixture with air. Incompatible with strong bases; strong acids; reducing agents. Moisture, water, and steam contact forms toxic and corrosive fumes. Violent reaction with oxidizers, alkaline earth metals (barium, calcium, magnesium, strontium, etc.), alkaline metals, sodium cyanide. Attacks metals in the presence of moisture.

Waste Disposal

Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal, state, and local environmental regulations must be observed. Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal.