ChemicalBook > CAS DataBase List > Diisopropyl ether

Diisopropyl ether

Product Name
Diisopropyl ether
CAS No.
108-20-3
Chemical Name
Diisopropyl ether
Synonyms
DIISOPROPYL ETHER;DIPE;2-ISOPROPOXYPROPANE;2,2'-Oxybispropane;2-propan-2-yloxypropane;ISOPROPYL ETHER, 1000MG, NEAT;(iso-C3H7)2O;Isoprpyl ether;Isopropyl ethe;Diisopropyleth
CBNumber
CB8852739
Molecular Formula
C6H14O
Formula Weight
102.17
MOL File
108-20-3.mol
More
Less

Diisopropyl ether Property

Melting point:
-85.5 °C
Boiling point:
68-69 °C(lit.)
Density 
0.725 g/mL at 25 °C(lit.)
vapor density 
3.5 (vs air)
vapor pressure 
120 mm Hg ( 20 °C)
refractive index 
n20/D 1.367(lit.)
Flash point:
−29 °F
storage temp. 
Store below +30°C.
solubility 
3.11g/l
form 
Liquid
color 
APHA: ≤25
Relative polarity
2.2
Odor
Sweet, slightly sharp; characteristic pungent; ethereal; like amphor and ethyl ether.
explosive limit
1-21%, 100°F
Water Solubility 
9 g/L (20 ºC)
Merck 
14,5212
BRN 
1731256
Henry's Law Constant
2.57 at 25 °C (headspace-GC, Arp and Schmidt, 2004)
Exposure limits
TLV-TWA 1045 mg/m3 (250 ppm) (ACGIH), 2090 mg/m3 (500 ppm) (OSHA); STEL 1300 mg/m3 (310 ppm) (ACGIH).
Dielectric constant
3.9(25℃)
Stability:
Extremely flammable. This material is a serious fire and explosion risk. Vapour may travel considerable distances to an ignition source, which need not be an open flame, but may be a hot plate, steam pipe, etc. Vapour may be ignited by the static electricty which can build up when isopropyl ether is being poured from one vessel
LogP
2.4 at 20℃
CAS DataBase Reference
108-20-3(CAS DataBase Reference)
NIST Chemistry Reference
Diisopropyl ether(108-20-3)
EPA Substance Registry System
Isopropyl ether (108-20-3)
More
Less

Safety

Hazard Codes 
F
Risk Statements 
11-19-66-67-52/53
Safety Statements 
9-16-29-33-61
RIDADR 
UN 1159 3/PG 2
OEB
A
OEL
TWA: 500 ppm (2100 mg/m3)
WGK Germany 
1
RTECS 
TZ5425000
10
Autoignition Temperature
827 °F
HS Code 
2909 19 90
HazardClass 
3
PackingGroup 
II
Hazardous Substances Data
108-20-3(Hazardous Substances Data)
Toxicity
LD50 in 14 day old, young adult, adult rats (ml/kg): 6.4, 16.5, 16.0 orally (Kimura)
IDLA
1,400 ppm [10% LEL]
More
Less

Hazard and Precautionary Statements (GHS)

Symbol(GHS)
Signal word
Danger
Hazard statements

H225Highly Flammable liquid and vapour

H336May cause drowsiness or dizziness

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P233Keep container tightly closed.

P240Ground/bond container and receiving equipment.

P241Use explosion-proof electrical/ventilating/lighting/…/equipment.

P242Use only non-sparking tools.

P243Take precautionary measures against static discharge.

More
Less

N-Bromosuccinimide Price

Sigma-Aldrich
Product number
95251
Product name
Diisopropyl ether
Purity
analytical standard
Packaging
1ML
Price
$42.5
Updated
2024/03/01
Sigma-Aldrich
Product number
95251
Product name
Diisopropyl ether
Purity
analytical standard
Packaging
5ML
Price
$171
Updated
2024/03/01
Sigma-Aldrich
Product number
95251
Product name
Diisopropyl ether
Purity
analytical standard
Packaging
10ML
Price
$304
Updated
2024/03/01
Sigma-Aldrich
Product number
8.00866
Product name
Diisopropyl ether
Purity
(stabilized with 2,6-di-tert-butyl-4-methylphenol (BHT)) for synthesis
Packaging
1L
Price
$50.6
Updated
2024/03/01
Sigma-Aldrich
Product number
8.00866
Product name
Diisopropyl ether
Purity
(stabilized with 2,6-di-tert-butyl-4-methylphenol (BHT)) for synthesis
Packaging
2.5L
Price
$113
Updated
2024/03/01
More
Less

Diisopropyl ether Chemical Properties,Usage,Production

Description

Diisopropyl ether [108-20-3], also known as 2-isopropoxyisopropane or isopropyl ether, is a clear, colorless, mobile, highly flammable liquid with a characteristic ethereal odor. Its solubility in water is low, but it is soluble in organic solvents and readily forms explosive peroxides. It has a higher boiling point, a lower vapor pressure, and a lower water solubility than diethyl ether, which means that diisopropyl ether can be recovered without significant loss after use as a solvent or as an extractant.

Chemical Properties

Diisopropyl ether(Isopropyl ether) is highly flammable, with a wide flammable range of 1.4%–21% in air. Boiling point is 156°F (68°C), flash point is 18°F (27°C), and ignition temperature is 830°F (443°C). Vapor density is 3.5, which is heavier than air. In addition to flammability, isopropyl ether is toxic by inhalation and a strong irritant, with a TLV of 250 ppm in air. Diisopropyl ether is an excellent solvent for natural oils, mineral oils, and waxes. It is used as an extracting agent and reaction medium in chemical and pharmaceutical syntheses.

Physical properties

Clear, colorless, volatile, flammable liquid with a penetrating, sweet, ether-like odor. Experimentally determined detection and recognition odor threshold concentrations were 70 μg/m3 (17 ppbv) and 220 μg/m3 (53 ppbv), respectively (Hellman and Small, 1974).

Uses

Isopropyl ether is used as a solvent for oils,waxes, resins, and dyes; and as a varnishremover.

Preparation

Diisopropyl ether can be prepared by liquid-phase dehydration of 2-propanol at 130 – 190°C and 1.96– 7.85 MPa over acidic catalysts containing aluminum.

General Description

Diisopropyl ether appears as a clear colorless liquid with an ethereal odor. Flash point -18°F. Less dense than water. Vapors heavier than air.

Air & Water Reactions

Highly flammable. Slightly soluble in water. Form explosive peroxide in storage. A flask of Isopropyl ether was heated on a steam bath with gentle shaking when an explosion occurred. In a second instance, an explosion occurred after practically all the ether had been distilled, [MCA Guide for Safety(1972)].

Reactivity Profile

Ethers, such as Isopropyl ether, can act as bases. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert. Mixing Isopropyl ether in equal molar portions with any of the following substances in a closed container caused the temperature and pressure to increase: chlorosulfonic acid, nitric acid, [NFPA 1991].

Hazard

Flammable, dangerous fire risk, explosive limits in air 1.4–21%. Toxic by inhalation, strong irritant.

Health Hazard

Isopropyl ether is a narcotic and an irritant tothe skin and mucous membranes. It is moretoxic than ethyl ether and the toxic symptomsare similar to the latter compound. Inhalationof its vapors can produce anesthetic effects.Exposure to high concentrations can causeintoxication, respiratory arrest, and death.Exposure to 3.14% and 2.9% of isopropylether in air (by volume) produced the symp toms of somnolence, change in motor activ ity, and muscle contractions in mice andrabbits, respectively, causing the death of50% of test animals. Exposure to 7–10% byvolume concentration in air can be fatal tohumans
Acute oral toxicity of isopropyl ether islow. The liquid is irritating to the mucousmembranes. Skin contact may cause mildirritation, and repeated exposure may causedermatitis. The irritation effect of isopropylether on eyes is mild. In humans, exposureto 800 ppm in air for a few minutes causedirritation of the eyes and nose. There is noreport of its carcinogenic action in animalsor humans.

Fire Hazard

Behavior in Fire: Vapor is heavier than air and may travel a considerable distance to a source of ignition and flash back. Containers may explode when heated.

Flammability and Explosibility

Highly flammable

Industrial uses

Isopropyl ether is a solvent of minor importance since its boiling point is intermediate between the two widely used solvents diethyl ether and acetone. Hazardous peroxides are formed more readily in isopropyl ether than in other dialkyl ethers.

Potential Exposure

ReproductiveEffector; Human Data; Primary Irritant. This material isused as a solvent, additive for gasoline, and a chemicalintermediate.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.

Source

Some unleaded gasoline may contain isopropyl ether and other oxygenates as an octane booster and to prevent engine knock.

Environmental Fate

Biological. Bridié et al. (1979) reported BOD and COD values of 0.19 and 1.75 g/g using filtered effluent from a biological sanitary waste treatment plant. These values were determined using a standard dilution method at 20 °C and stirred for a period of 5 d. The ThOD for isopropyl ether is 2.82 g/g.
Chemical/Physical. May form explosive peroxides on standing with air (NIOSH, 1997). At an influent concentration of 1,018 mg/L, treatment with GAC resulted in an effluent concentration of 203 mg/L. The adsorbability of the GAC used was 162 mg/g carbon (Guisti et al., 1974).
Isopropyl will not hydrolyze in water except at elevated temperatures and low pH.

storage

Isopropyl ether is stored in a flammable-liquids storage room, isolated from combustible and oxidizing materials. It shouldalso be protected from direct sunlight, staticelectricity, and lightning. It is stabilized with0.01% hydroquinone or p-benzylaminphenol.The ether is shipped in amber glass bottles,steel cans, and drums.

Shipping

This compound requires a shipping label of“FLAMMABLE LIQUID.” It falls in Hazard Class 3 andPacking Group II.

Purification Methods

Common impurities are water and peroxides [detected by the liberation of iodine from weakly acid (HCl) solutions of 2% KI]. Peroxides can be removed by shaking with aqueous Na2SO3 or with acidified ferrous sulfate (0.6g FeSO4 and 6mL conc H2SO4 in 110mL of water, using 5-10g of solution per L of ether), or aqueous NaBH4 solution. The ether is then washed with water, dried with CaCl2 and distilled. Alternatively, refluxing with LiAlH4 or CaH2, or drying with CaSO4, then passage through an activated alumina column, can be used to remove water and peroxides. Other dehydrating agents used with isopropyl ether include P2O5, sodium amalgam and sodium wire. (The ether is often stored in brown bottles, or in the dark, with sodium wire.) Bonner and Goishi (J Am Chem Soc 83 85 1961) treated isopropyl ether with dilute sodium dichromate/sulfuric acid solution, followed by repeated shaking with a 1:1 mixture of 6M NaOH and saturated KMnO4. The ether is washed several times with water, dilute aqueous HCl, and water, with a final washing with, and storage over, ferrous ammonium sulfate acidified with H2SO4. Blaustein and Gryder (J Am Chem Soc 79 540 1957), after washing with alkaline KMnO4, then water, treated the ether with ceric nitrate in nitric acid, and again washed it with water. Hydroquinone is added before drying with CaCl2 and MgSO4, and refluxing with sodium amalgam (108g Hg/100g Na) for 2hours under nitrogen. The distillate (nitrogen atmosphere) is made 2 x 10-5M in hydroquinone to inhibit formation of peroxides (which is negligible if the ether is stored in the dark). Catechol (pyrocatechol) and resorcinol are alternative inhibitors. [Beilstein 1 IV 1471.]

Incompatibilities

Forms explosive mixture with air. Aircontact forms explosive peroxides that may explode withheat or shock. Contact with strong oxidizers or strong acidsmay cause a fire and explosion hazard. Attacks some plastics, rubber, and coatings.

Waste Disposal

Isopropyl ether is burned in a chemicalincinerator equipped with an afterburner andscrubber. A small amount of ether, if free ofperoxides, can be evaporated in a fume hoodin the absence of any open flame or sourceof ignition nearby.

More
Less

Diisopropyl ether Suppliers

Aladdin Scientific
Tel
+1-+1(833)-552-7181
Email
sales@aladdinsci.com
Country
United States
ProdList
57505
Advantage
58
Alfa Chemistry
Tel
Email
info@alfa-chemistry.com
Country
United States
ProdList
2344
Advantage
58
Aston Chemical
Tel
13000000000
Email
sales@astonchem.com
Country
United States
ProdList
1634
Advantage
58
Neuchem
Tel
--
Fax
--
Email
INFO@NEUCHEM.COM
Country
United States
ProdList
256
Advantage
58
Greenchem Industries LLC
Tel
--
Fax
--
Email
info@greenchemindustries.com
Country
United States
ProdList
61
Advantage
58
Wego Chemical Group
Tel
--
Fax
--
Email
sales@wegochem.com
Country
United States
ProdList
443
Advantage
58
Parchem Fine & Specialty Chemicals
Tel
--
Fax
--
Email
info@parchem.com
Country
United States
ProdList
1031
Advantage
58
MilliporeSigma (Sigma-Aldrich Corp.)
Tel
--
Fax
--
Email
@sial.com
Country
United States
ProdList
5414
Advantage
58
Global ChemSources Inc.
Tel
--
Fax
--
Country
United States
ProdList
17
Advantage
58
Redox Scientific
Tel
--
Fax
--
Email
info@redoxsci.com
Country
United States
ProdList
2380
Advantage
58
Brenntag North America, Inc.
Tel
--
Fax
--
Email
bnereadingcs@brenntag.com
Country
United States
ProdList
211
Advantage
58
2A Biotech USA
Tel
--
Fax
--
Email
info@2abiotech.com
Country
United States
ProdList
1785
Advantage
58
MP Biomedicals, LLC. (Division of Valiant FC Co., Ltd.)
Tel
--
Fax
--
Email
serv@mpbio.com
Country
United States
ProdList
1854
Advantage
58
Silver Fern Chemical Inc
Tel
--
Fax
--
Email
info@silverfernchemical.com
Country
United States
ProdList
157
Advantage
58
Crescent Chemical Company
Tel
--
Fax
--
Email
fran@creschem.com
Country
United States
ProdList
1441
Advantage
58
Alliance Chemical
Tel
--
Fax
--
Email
alliance@alliancechemical.com
Country
United States
ProdList
88
Advantage
58
TCI America, Inc. (part of Tokyo Chemical Industry)
Tel
--
Fax
--
Email
Angelina.Crew@tcichemicals.com
Country
United States
ProdList
2053
Advantage
58
AK Scientific, Inc.
Tel
--
Fax
--
Email
sales@aksci.com
Country
United States
ProdList
6347
Advantage
65
Jaytick Chemicals Inc.
Tel
--
Fax
--
Email
info@jaytick.com
Country
United States
ProdList
64
Advantage
58
Chem Service, Inc
Tel
--
Fax
--
Country
United States
ProdList
240
Advantage
58
VWR International, LLC.
Tel
--
Fax
--
Email
@sargentwelch.com
Country
United States
ProdList
6262
Advantage
58
United States Biological
Tel
--
Fax
--
Email
chemicals@usbio.net
Country
United States
ProdList
6214
Advantage
80
Riedel-de Haen AG
Tel
--
Fax
--
Country
United States
ProdList
6773
Advantage
87
Matrix Scientific
Tel
--
Fax
--
Email
sales@matrixscientific.com
Country
United States
ProdList
6632
Advantage
80
AccuStandard Inc
Tel
--
Fax
--
Email
info@bester.nl
Country
United States
ProdList
5300
Advantage
76
Nanjing Datang Chemicals Co.,Ltd.
Tel
--
Fax
--
Country
United States
ProdList
73
Advantage
38
Sisco Research Laboratories Pvt. Ltd.
Tel
--
Fax
--
Email
srlmarketing@dishnetdsl.net
Country
United States
ProdList
1905
Advantage
64
Waterstone Technology, LLC
Tel
--
Fax
--
Email
sales@waterstonetech.com
Country
United States
ProdList
6786
Advantage
30
Chem-Impex International, Inc.
Tel
--
Fax
--
Country
United States
ProdList
6730
Advantage
64
ChemService Inc.
Tel
--
Fax
--
Country
United States
ProdList
6379
Advantage
68
Pfaltz & Bauer, Inc.
Tel
--
Fax
--
Email
sales@pfaltzandbauer.com
Country
United States
ProdList
6828
Advantage
72
Spectrum Chemicals & Laboratory Products
Tel
--
Fax
--
Email
sales@spectrumchemical.com
Country
United States
ProdList
6699
Advantage
77
Leonid Chemicals Private Limited
Tel
--
Fax
--
Email
careers@leonidchemicals.com
Country
United States
ProdList
1700
Advantage
43
Advance Scientific & Chemical
Tel
--
Fax
--
Email
sales@advance-scientific.com
Country
United States
ProdList
6419
Advantage
71
Naugra Export
Tel
--
Fax
--
Country
United States
ProdList
1332
Advantage
47
DuPont Specialty Colorants & Additives
Tel
--
Fax
--
Country
United States
ProdList
1186
Advantage
87
2A PharmaChem USA
Tel
--
Fax
--
Email
sales@2apharmachem.com
Country
United States
ProdList
6137
Advantage
39
3B Scientific Corporation
Tel
--
Fax
--
Email
sales@3bsc.com
Country
United States
ProdList
6718
Advantage
47
Chemiplus Corporation
Tel
--
Fax
--
Email
okazaki@chemiplus.com
Country
United States
ProdList
3198
Advantage
38
SKC Inc.
Tel
--
Fax
--
Email
skcorder@skcinc.com
Country
United States
ProdList
1378
Advantage
76
Varian, Inc.
Tel
--
Fax
--
Email
custserv@varianinc.com
Country
United States
ProdList
224
Advantage
85
Parchem Trading Ltd.
Tel
--
Fax
--
Email
info@parchem.com
Country
United States
ProdList
794
Advantage
76
Parchem Trading Ltd.
Tel
--
Fax
--
Email
info@par-chem.com
Country
United States
ProdList
740
Advantage
66
Shell Nederland Chemie B.V.
Tel
--
Fax
--
Email
alexandra.wright@shell.com
Country
United States
ProdList
66
Advantage
81
Spectra Gases, Inc.
Tel
--
Fax
--
Email
ritap@spectragases.com
Country
United States
ProdList
93
Advantage
78
Sciencelab.com, Inc.
Tel
--
Fax
--
Email
accounting@sciencelab.com
Country
United States
ProdList
4159
Advantage
82
Lab Express
Tel
--
Fax
--
Email
sales@labexpress.com
Country
United States
ProdList
1577
Advantage
67
Loba Chemie Pvt. Ltd.
Tel
--
Fax
--
Country
United States
ProdList
1945
Advantage
71
American Custom Chemicals Corporation
Tel
--
Fax
--
Email
sales@acccorporation.com
Country
United States
ProdList
6820
Advantage
51
EMD Chemicals Inc.
Tel
--
Fax
--
Email
emdinfo@emdchemicals.com
Country
United States
ProdList
1525
Advantage
77
More
Less

View Lastest Price from Diisopropyl ether manufacturers

Qingdao RENAS Polymer Material Co., Ltd.
Product
Diisopropyl ether 108-20-3
Price
US $0.00/kg
Min. Order
20kg
Purity
99%
Supply Ability
20 tons
Release date
2024-08-27
Qingdao RENAS Polymer Material Co., Ltd.
Product
Diisopropyl ether 108-20-3
Price
US $0.00/kg
Min. Order
20kg
Purity
99%
Supply Ability
20 tons
Release date
2024-09-29
Hebei Chuanghai Biotechnology Co,.LTD
Product
Isopropyl ether 108-20-3
Price
US $10.70/KG
Min. Order
10KG
Purity
99%
Supply Ability
10000kg
Release date
2024-08-20

108-20-3, Diisopropyl etherRelated Search:


  • (iso-C3H7)2O
  • 1,1'-Dimethyldiethyl ether
  • 1-methyl-1-(1-methylethoxy)ethane
  • 2,2’-oxybis-propan
  • 2,2’-oxybispropane
  • 2,2’-oxybis-Propane
  • Isopropyl ether, stabilized with 100-200 ppm BHT
  • DI-ISO-PROPYL ETHER PURISS. P.A.,STABILIZED
  • DIISOPROPYL ETHER, A.C.S. REAGENT, >=99&
  • ISOPROPYL ETHER, 1000MG, NEAT
  • ISOPROPYL ETHER, 99+%, A.C.S. REAGENT
  • DIISOPROPYL ETHER, REAGENTPLUS, >=99%
  • DIISOPROPYL ETHER, ANHYDROUS, 99%
  • ISOPROPYL ETHER DRIED OVER NA/PB ALLOY&
  • ISOPROPYL ETHER, 99+%, A.C.S. REAGENT (S AFETY CAN)
  • ISOPROPYL ETHER GC STANDARD
  • Di-Iso-PropylEtherGr
  • IsopropylEther,Acs
  • Isoprpyl ether
  • Isopropyl ether, stabilized with BHT, extra pure, 99+%
  • Isopropyl ether, stabilized with BHT, pure, 98+%
  • Isopropyl ether, stabilized, for analysis
  • ISOPROPYLETHER,REAGENT,ACS
  • PMI Stock Isopropyl ether
  • DIISOPROPYL ETHER, PUREX ANALYTICAL GRADE, 200L
  • DIISOPROPYL ETHER , STABILIZED WITH 100PPM BHT
  • Diisopropyl ether, 98+%, stab. with 100ppm BHT
  • Isopropyl Ether (stabilized with HQ)
  • Propyl Ether, iso-
  • DIISOPROPYLETHER extrapure AR
  • DIISOPROPYLETHER pure
  • Isopropyl Ether, Reagent
  • Isopropyl ether, 99+%, stabilized with BHT, extra pure
  • Isopropyl ether, for analysis, stabilized
  • Isopropyl ether, stabilized with BHT, pure
  • Isopropyl ether, stabilized with BHT, extra pure
  • Diisoproyl ether
  • Isopropyl oxide
  • DIISOPROPYL ETHER (STABILIZED WITH 2,6-D
  • DIISOPROPYL ETHER FOR ANALYSIS EMSURE
  • Isopropyl ethe
  • Isopropyl ether,99+%,extra pure,stabilized with BHT
  • Isopropyl Ether, GR ACS
  • Isopropyl Ether, Stabilized, Reagent, ACS
  • Diisopropyl ether, 98%, SpcDry, Water≤50 ppM (by K.F.), SpcSeal
  • Diisopropyleth
  • Diisopropyl ether anhydrous, 99%, contains either BHT or hydroquinone as stabilizer
  • Diisopropyl ether contains either BHT or hydroquinone as stabilizer, ACS reagent, >=99.0%
  • Diisopropyl ether puriss. p.a., >=98.5% (GC)
  • Diisopropyl ether ReagentPlus(R), 99%, contains either BHT or hydroquinone as stabilizer
  • Diisopropyl etheranhydrous, contains BHT (50-100 ppm) as stabilizer≥ 99% (Assay)
  • Diisopropyl ether (stabilised with BHT) Msynthplus
  • Diisopropyl ether, 99%, SuperDry, stabilized with BHT, water≤20 ppm, J&KSeal
  • Isopropyl Ether (stabilized with BHT)
  • 2,2'-Oxybispropane
  • 2,4-dimethyl-3-oxapentane
  • bis-(1-Methylethyl)ether
  • bis(1-methylethyl)ether