ChemicalBook > CAS DataBase List > Dimethylamine

Dimethylamine

Product Name
Dimethylamine
CAS No.
124-40-3
Chemical Name
Dimethylamine
Synonyms
(CH3)2NH;Dimethylamin;Metformin EP Impurity F;DiMethylaMine (~2.0 M in THF);Dimethylamine methanol solution;DiMethylaMine, 2.0 M solution in THF, SpcSeal;Dimethylamine (ca. 10% in Tetrahydrofuran, ca. 2mol/L);DMA-40;DMA-60;DMA-65
CBNumber
CB8852986
Molecular Formula
C2H7N
Formula Weight
45.08
MOL File
124-40-3.mol
More
Less

Dimethylamine Property

Melting point:
−93 °C(lit.)
Boiling point:
7 °C(lit.)
Density 
0.89 g/mL at 25 °C
vapor density 
1.55 (vs air)
vapor pressure 
16.97 psi ( 55 °C)
refractive index 
n20/D 1.37
Flash point:
60 °F
storage temp. 
Flammables area
solubility 
very soluble in water (163 g/100 g water at 40°C); soluble in ethanol, ethyl ether, and many organic solvents
form 
Solution
pka
10.68(at 25℃)
color 
Clear slightly yellow
Odor
Ammonical odour
Odor Threshold
0.033ppm
explosive limit
14.4%
Water Solubility 
Miscible with water and most organic solvents.
Sensitive 
Hygroscopic
Merck 
14,3228
BRN 
605257
Henry's Law Constant
1.75(x 10-5 atm?m3/mol) at 25 °C (Christie and Crisp, 1967)
Exposure limits
TLV-TWA 10 ppm (~18 mg/m3) (ACGIH, MSHA, and OSHA); IDLH 2000 ppm (NIOSH).
Dielectric constant
6.3(0℃)
Stability:
Stable. Generally used as a solution in water at concentrations up to around 40%. Extremely flammable in the pure form. Incompatible with strong oxidizing agents.
LogP
-0.274 at 25℃
CAS DataBase Reference
124-40-3(CAS DataBase Reference)
NIST Chemistry Reference
Methanamine, N-methyl-(124-40-3)
EPA Substance Registry System
Dimethylamine (124-40-3)
More
Less

Safety

Hazard Codes 
F+,Xn,C,F,T
Risk Statements 
12-20-37/38-41-34-20/22-11-39/23/24/25-23/24/25-52/53-40-19
Safety Statements 
3-16-26-29-36/37/39-45-39-61
RIDADR 
UN 2924 3/PG 2
WGK Germany 
2
RTECS 
IP8750000
3
Autoignition Temperature
753 °F
TSCA 
Yes
DOT Classification
2.1 (Flammable gas)
HazardClass 
3
PackingGroup 
II
HS Code 
29211100
Hazardous Substances Data
124-40-3(Hazardous Substances Data)
Toxicity
Acute oral LD50 for guinea pigs 340 mg/kg, mice 316 mg/kg, rats 698 mg/kg, rabbits 240 mg/kg (quoted, RTECS, 1985).
IDLA
500 ppm
More
Less

Hazard and Precautionary Statements (GHS)

Symbol(GHS)
Signal word
Danger
Hazard statements

H225Highly Flammable liquid and vapour

H314Causes severe skin burns and eye damage

H335May cause respiratory irritation

H412Harmful to aquatic life with long lasting effects

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P233Keep container tightly closed.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

More
Less

N-Bromosuccinimide Price

Sigma-Aldrich
Product number
295280
Product name
Dimethylamine
Purity
anhydrous, ≥99%
Packaging
100g
Price
$230
Updated
2024/03/01
Sigma-Aldrich
Product number
295280
Product name
Dimethylamine
Purity
anhydrous, ≥99%
Packaging
1kg
Price
$406
Updated
2024/03/01
Sigma-Aldrich
Product number
1211200
Product name
Dimethylamine solution
Packaging
6X3ML
Price
$856
Updated
2024/03/01
Alfa Aesar
Product number
031458
Product name
Dimethylamine, 40% w/w aq. soln.
Packaging
1kg
Price
$65.8
Updated
2023/06/20
Alfa Aesar
Product number
031458
Product name
Dimethylamine, 40% w/w aq. soln.
Packaging
3kg
Price
$165
Updated
2023/06/20
More
Less

Dimethylamine Chemical Properties,Usage,Production

Description

Dimethylamine is a colourless flammable gas at room temperature. It has a pungent, fishy, or ammonia-like odour at room temperature and is shipped and marketed in compressed liquid form. It is very soluble in water and soluble in alcohol and ether. It is incompatible with oxidising materials, acrylaldehyde, fluorine, maleic anhydride, chlorine, or mercury. Dimethylamine is a precursor to several industrially important compounds. For instance, it used in the manufacture of several products, for example, for the vulcanisation process of rubber, as detergent soaps, in leather tanning, in the manufacture of pharmaceuticals, and also for cellulose acetate rayon treatment.

dimethylamine structure

Chemical Properties

Dimethylamine reacts readily with acids to produce salts due to the presence of the unshared electron pair on the nitrogen atom. Similarly, dimethylamine reacts with acid anhydrides, halides, and esters, with CO2 or CS2, or with isocyanic or isothiocyanic acid derivatives. It can also react with nitrite, especially under acidic conditions, and possibly nitrogen oxides (Iqbel 1986) to form N-nitrosodimethylamine, a potent carcinogen in various animal species and a suspect human carcinogen (ATSDR 1989; Scanlan 1983; Zeisel et al 1988). N-Nitrosodimethylamine also can be formed upon storage of aqueous dimethylamine solutions or formulations of the dimethylamine salts of the herbicides 2,4D and MCPA (Wigfield and McLenaghan 1987a,b). Dimethylamine also can be nitrosated photochemically in aqueous solutions containing nitrite with the reaction occurring most readily at alkaline pH (Ohta et al 1982).

Physical properties

Clear, colorless liquid or gas with a strong, ammonia-like odor. Odor threshold concentrations of 33 ppbv and 47 ppbv were experimentally determined by (Leonardos et al., 1969) and Nagata and Takeuchi (1990), respectively.

Uses

Dimethylamine is used in the manufactureof N-methylformamide, N-methylacetamide,and detergent soaps; in tanning; and as anaccelerator in vulcanizing rubber. It is commercially sold as a compressed liquid intubes or as a 33% aqueous solution..

Uses

Manufacture of pharmaceuticals; stabilizer in gasoline; in production of insecticides and fungicides; in manufacture of soaps and surfactants

Uses

Dimethylamine is a used as a precursor to several industrially significant compounds. It reacts with carbon disulfide to give dimethyl dithiocarbamate, a precursor to a family of chemicals widely used in the vulcanization of rubber. It is raw material for the production of many agrochemicals and pharmaceuticals, such as dimefox and diphenhydramine, respectively.

Definition

ChEBI: A secondary aliphatic amine where both N-substituents are methyl.

Production Methods

Methods used commercially for the large-scale production of dimethylamine are generally those used for methylamine synthesis (HSDB 1989). The most widely used process involves heating ammonium chloride and methyl alcohol to about 300°C in the presence of a dehydrating catalyst such as zinc chloride. Dimethylamine has also been prepared from methanol and ammonia or by the catalytic hydrogenation of nitrosodimethylamine (Schweizer et al 1978). It is usually marketed in compressed liquid (anhydrous) form or as a 25-60% aqueous solution.
Dimethylamine is also naturally present in biological systems, probably being formed as a breakdown product from trimethylamine N-oxide (Timofievskaja 1984). Thus it is present in gastric juice of humans, rats, dogs and ferrets at concentrations of 12.6 ± 14 nmol/ml (Zeisel et al 1988); it is a constituent of most foods, especially seafood including squid and octopus, frequently eaten in traditional Chinese and Japanese diets, where it reaches concentrations of 946-2043 p.p.m. (Lin et al 1983,1984). Food processing and cooking markedly increases the dimethylamine contents of foods by increasing the breakdown of constituents such as trimethylamine N-oxide and sarcosine (Lin et al 1983, 1984; Lin and Hurng 1985). Dimethylamine occurs in the air of iron foundries where the amine was used in the casting process (Hansen et al 1985) and also is released from plastic material used in construction (Kiselev et al 1983).
Nitrosation of dimethylamine occurs forming the carcinogenic N-nitrosodimethylamine upon storage of anhydrous and aqueous solutions of dimethylamine or formulations of the dimethylamine salts of the herbicides 2,4-dichlorophenoxyacetic acid (2,4D), 4-chloro-2-methylphenoxyacetic acid (MCPA) and 3,6-dichloro- 2-methoxybenzoic acid (dicamba) (Wigfield and McLenaghan 1987a,b). The volatile N-nitrosodimethylamine is also formed in foods by reaction of dimethylamine with sodium nitrite added as a preservative or by reaction with atmospheric nitrogen oxides during food processing (ATSDR 1989; Gross and Newberne 1977; Scanlan 1983). Concentrations of the nitrosoamine in cheese, apple cider, milk, cereals, vegetables, seafood, cured meats, etc. range between 0.05 and 130 p.p.b. (ATSDR 1989).

Air & Water Reactions

Highly flammable. Water soluble.

Reactivity Profile

DIMETHYLAMINE is a base, neutralizing acids in exothermic reactions, and a reducing agent. Dimethylamine is temperature sensitive. Reacts vigorously with mercury and chlorine . Reacts violently with strong oxidizing agents and attacks copper and copper compounds [Handling Chemicals Safely, 1980 p. 123]. Reacts with hypochlorites to give N-chloroamines, some of which are explosives when isolated [Bretherick, 1979 p. 108].

Hazard

Dimethylamine is an irritant, with a TLV of 10 ppm in air. The four-digit UN identification number is 1032. The NFPA 704 designation is health 3, flammability 4, and reactivity 0. The primary uses are in electroplating and as gasoline stabilizers, pharmaceuticals, missile fuels, pesticides, and rocket propellants.

Health Hazard

Dimethylamine is a strong irritant to the eyes,skin, and mucous membranes. Spill of liquidinto the eyes can cause corneal damage andloss of vision. Skin contact with the liquidcan produce necrosis. At sublethal concentra tions, inhalation of dimethylamine producedrespiratory distress, bronchitis, pneumonitis,and pulmonary edema in test animals. Theacute oral toxicity was moderate, greater thanfor monomethylamine.
LC50 value, inhalation (rats): 4540 ppm/6 hLD50 value, oral (mice): 316 mg/kg
Buckley and coworkers (1985) have investigated the inhalation toxicity of dimethylamine in F-344 rats and B6C3F1 mice.Animals exposed to 175 ppm for 6 h/day,5 days/week for 12 months showed significant lesions in the nasal passages. Rats developed more extensive olfactory lesions thandid mice. The study indicated that olfactory sensory cells were highly sensitive todimethylamine. Even at a concentration of10 ppm, the current threshold limit value,the rodents developed minor lesions fromexposure.

Fire Hazard

FLAMMABLE. Flashback along vapor trail may occur. May explode if ignited in an enclosed area. Vapors are eye, skin and respiratory irritants.

Flammability and Explosibility

Extremely flammable liquified gas

Industrial uses

Dimethylamine is used as an accelerator in vulcanizing rubber, as an antiknock agent for fuels, in photography, as a plasticizer, ion exchange agent, as an acid gas absorbent, a flotation agent, a dehairing agent in the tanning of leather and in electroplating (HSDB 1989; Sax and Lewis 1987; Windholz et al 1983). Dimethylamine also serves as the base for a large number of commercial products including detergent soaps, dyes, pharmaceuticals, textile chemicals, surfactants and in the manufacture of unsymmetrical dimethylhydrazine (used in missile fuels), the solvent dimethylacetanilide and in the synthesis of dimethylformamide, one of the most commonly used organic solvents. Usage of dimethylamine in 1972 was estimated at 50% for production of dimethylformamide and dimethylacetamide (used as spinning solvents for acrylic fibers), 15% as an intermediate in the preparation of the surfactant laurel dimethylamine oxide, 15% as an intermediate for rubber chemicals (including thorium accelerators), and 20% for other applications including the production of unsymmetrical dimethylhydrazine in rocket fuels and the dimethylamine salt of 2,4-dichlorophenoxyacetic acid (HSDB 1989). U.S. production and sales of dimethylamine in 1985 was 65.9 million pounds.

Safety Profile

Poison by ingestion. Moderately toxic by inhalation and intravenous routes. Mutation data reported. An eye irritant. Corrosive to the eyes, skin, and mucous membranes. A flammable gas. When heated to decomposition it emits toxic fumes of Nx,. Incompatible with acrylddehyde, fluorine, and maleic anhydride

Potential Exposure

Mutagen.Primary Irritant. This material is used in leather tanning; asan accelerator in rubber vulcanization; in the manufactureof detergents; in drug synthesis and pesticide manufacture.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediately with soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.Medical observation is recommended for 24-48 h afterbreathing overexposure, as pulmonary edema may bedelayed. As first aid for pulmonary edema, a doctor orauthorized paramedic may consider administering a corticosteroid spray.If frostbite has occurred, seek medical attention immediately; do NOT rub the affected areas or flush them withwater. In order to prevent further tissue damage, do NOTattempt to remove frozen clothing from frostbitten areas. Iffrostbite has NOT occurred, immediately and thoroughlywash contaminated skin with soap and water.

Carcinogenicity

In a 2 year inhalation study in male F344 rats exposed to 175 ppm, no evidence of carcinogenicity was observed, and in addition, despite severe tissue destruction in the anterior nose following a single 6 h exposure, the nasal lesions exhibited very little evidence of progression, even at 2 years of exposure. The authors concluded that this indicated possible regional susceptibility to DMA toxicity or a degree of adaptation by the rat to continued DMA exposure.
A detailed evaluation of mucociliary apparatus function and response to alterations of nasal structure was presented by the authors.

Source

Dimethylamine naturally occurs in soybean seeds (8 ppm), cauliflower (14 ppm), kale leaves (5.5 ppm), barleygrass seeds (1.6 ppm), tobacco leaves, hawthorne leaves, hops flower (1.4 ppm), cabbage leaves (2–2.8 ppm), corn (1–3.5 ppm), celery (5.1 ppm), grapes, grape wine, and grape juice (Duke, 1992).

Environmental Fate

Photolytic. Dimethylnitramine, nitrous acid, formaldehyde, N,N-dimethylformamide and carbon monoxide were reported as photooxidation products of dimethylamine with NOx. An additional compound was tentatively identified as tetramethylhydrazine (Tuazon et al., 1978). In the atmosphere, dimethylamine reacts with OH radicals forming formaldehyde and/or amides (Atkinson et al., 1978). The rate constant for the reaction of dimethylamine and ozone in the atmosphere is 2.61 x 10-18 cm3/molecule?sec at 296 K (Atkinson and Carter, 1984).
Soil. After 2 d, degradation yields in an Arkport fine sandy loam (Varna, NY) and sandy soil (Lake George, NY) amended with sewage and nitrite-N were 50 and 20%, respectively. NNitrosodimethylamine was identified as the major metabolite (Greene et al., 1981). Mills and Alexander (1976) reported that N-nitrosodimethylamine also formed in soil, municipal sewage, and lake water supplemented with dimethylamine (ppm) and nitrite-N (100 ppm). They found that nitrosation occurred under nonenzymatic conditions at neutral pHs.
Photolytic. Low et al. (1991) reported that the photooxidation of aqueous secondary amine solutions by UV light in the presence of titanium dioxide resulted in the formation of ammonium and nitrate ions.
Chemical/Physical. In an aqueous solution, chloramine reacted with dimethylamine forming N-chlorodimethylamine (Isaac and Morris, 1983).
Reacts with mineral acids forming water soluble ammonium salts and ethanol (Morrison and Boyd, 1971).

Metabolism

Dimethylamine is normally present in the stomach and urine of animals and humans. The secondary amine is formed from trimethylamine (a breakdown product of dietary choline) via trimethylamine N-oxide (Zeisel et al 1985) and probably also from dietary lecithin and creatine (Lewis et al 1985). Enzymes within gut bacteria catalyze these conversions. The resulting dimethylamine is readily absorbed primarily from the small intestine, and to a much lesser extent, the stomach, and excreted in the urine (Ishiwata et al 1984; Zeisel et al 1983). Humans consuming a diet high in fish show at least a 4-fold increase in urinary dimethylamine excretion (Zeisel and Dacosta 1986).
Although dimethylamine may arise primarily from trimethylamine in a process catalyzed by bacteria, when rats were fed a commercial diet containing 23.6 p.p.m. dimethylamine, nearly 50% of the amine was recovered in the stomach with progressively declining amounts found towards lower regions of the gastrointestinal tract (Ishiwata et al 1984). Using ligated sections, the t1/2 of dimethylamine was found to be 198 min in the stomach with the intestines and caecum varying from 8.3-31.5 min. The results indicated that dimethylamine is rapidly absorbed from the intestine and into the blood from where it disappears quickly, to be excreted predominately in the urine with a small amount excreted into the bile.
In rats fed a choline deficient diet, or rats devoid of gut bacteria, dimethylamine was still excreted in the urine (Zeisel et al 1985). This suggests that mammalian cells may possess other, as yet undefined, endogenous pathways for forming dimethylamine. The absorption, distribution and secretion of dimethylamine in the digestive tract and its biliary and urinary excretion was studied in male Wistar rats (Ishiwata et al 1984). Animals were fed diets containing 1 or 23.6 p.p.m. dimethylamine for one wk and then killed. Single i.v. doses also were administered to control and bile-duct cannulated rats and the urine collected over a 24 h period. The authors found high dimethylamine concentrations in the upper part of the gastrointestinal tract and a low concentration in the lower intestine. The half-life for injected dimethylamine was 12.5 min and excretion was primarily via the bile.
The disposition and pharmacokinetics of [14C]-dimethylamine were also studied in male Fischer 344 rats following 6 h inhalation of 10 or 175 p.p.m. of the labeled amine (McNulty and Heck 1983). At 72 h after exposure, the disposition at both doses was similar with greater than 90% of the radioactivity appearing in the urine and feces, 7-8% in various tissues and 1.5% exhaled as 14CO2. Over 98% of the urinary radioactivity was the parent [14C]-dimethylamine. However, some formation of small quantities of dimethylamine oxidative metabolites was seen.
Much of the concern over the presence of dimethylamine in humans stems from its ability to serve as a precursor for the formation of the putative carcinogen, N-nitrosodimethylamine. Accordingly, several studies have been conducted to assess the potential for exogenously administered dimethylamine to form this nitroso compound. When dimethylamine was given intravenously to dogs and ferrets, the amine was rapidly transported from the blood into the gastric fluid, where N-nitrosodimethylamine formation can occur (Zeisel et al 1986). Nnitrosodimethylamine was formed in vitro when sodium nitrite was added to dog (Lintas et al 1982) or human gastric fluid (Zeisel et al 1988). The resulting N-nitrosamine then is rapidly absorbed from the stomach. When conventional and germfree male Wistar rats were treated with dimethylamine and sodium nitrite, severe liver necrosis was observed at 48 h only in the germfree animals (Sumi and Miyakawa 1983). This may indicate, at least in this species, that metabolism of dimethylamine by intestinal microflora may minimize nitrosamine formation. 7V-nitrosodimethylamine requires metabolic activation to form the reactive alkylating species responsible for the carcinogenic and mutagenic activity of the nitrosamine (ATSDR 1989).

storage

Dimethylamine should be stored in a cool, dry, well-ventilated area in tightly sealed containers that are labeled in accordance with OSHA’s Hazard Communication Standard [29 CFR 1910.1200]. Containers of dimethylamine should be protected from physical damage and ignition sources, and should be stored separately from oxidizing materials, acrylaldehyde, fl uorine, maleic anhydride, chlorine, and mercury. Outside or detached storage is preferred. If stored inside, a standard flammable liquids cabinet or room should be used. Ground and bond metal containers and equipment when transferring liquids. Empty containers of dimethylamine should be handled appropriately.

Shipping

This compound requires a shipping label of“POISON GAS, FLAMMABLE GAS.” It falls in HazardClass 2.1.

Purification Methods

Dry dimethylamine by passage through a KOH-filled tower, or by standing with sodium pellets at 0o during 18hours. [Beilstein 4 IV 128.]

Incompatibilities

Dimethylamine is a medium strong base.Reacts violently with strong oxidizers; with mercury causing fire and explosion hazard. Incompatible with acids,organic anhydrides, isocyanates, vinyl acetate, acrylates,substituted allyls, alkylene oxides, epichlorohydrin, ketones,aldehydes, alcohols, glycols, phenols, cresols, caprolactumsolution. Attacks aluminum, copper, lead, tin, zinc andalloys, some plastics, rubbers, and coatings.

Precautions

During handling of dimethylamine, workers should use proper fume hoods, personal protective clothing and equipment, avoid skin contact, and use gloves, sleeves, and encapsulating suits. Dimethylamine is extremely flammable and may be ignited by heat, sparks, or open flames. Liquid dimethylamine will attack some forms of plastic, rubber, and coatings and is flammable. The vapors of dimethylamine are an explosion and poison hazard. Containers of dimethylamine may explode in the heat of a fi re and require proper disposal. Workers should use dimethylamine with adequate ventilation and containers must be kept properly closed.

More
Less

View Lastest Price from Dimethylamine manufacturers

Hebei Dangtong Import and export Co LTD
Product
Dimethylamine 124-40-3
Price
US $70.00-50.00/kg
Min. Order
1kg
Purity
99%
Supply Ability
20Tons
Release date
2023-10-10
Wuhan Boyuan Import & Export Co., LTD
Product
Dimethylamine 124-40-3
Price
US $6.00/kg
Min. Order
1kg
Purity
40% 98%
Supply Ability
5000ton
Release date
2023-07-07
Hebei Mojin Biotechnology Co., Ltd
Product
Dimethylamine 124-40-3
Price
US $0.00/KG
Min. Order
1KG
Purity
99%
Supply Ability
50000KG/month
Release date
2023-02-01

124-40-3, DimethylamineRelated Search:


  • DiMethylaMine, 2M solution in Methyl alcohol, AcroSeal
  • DiMethylaMine, 2M solution in THF, AcroSeal
  • N-Methylmethylamine
  • DiMethylaMine, 2.0 M in THF, J&Kseal
  • DiMethylaMine (~2.0 M in THF)
  • DiMethylaMine, 2.0 M solution in Methanol, SpcSeal
  • DiMethylaMine, 2.0 M solution in THF, SpcSeal
  • DiMethylaMine, 30% solution in ethanol, SpcSeal
  • DiMethylaMine, 30% solution in Methanol, SpcSeal
  • Dimethylamine (ca. 10% in Tetrahydrofuran, ca. 2mol/L)
  • Dimethylamine (ca. 11% in Ethanol, ca. 2.0mol/L)
  • Dimethylamine (ca. 11% in Isopropyl Alcohol, ca. 2mol/L)
  • Dimethylamine solution 2.0 M in methanol
  • Dimethylamine >=99.8%
  • Dimethylamine 30%solution in methanol
  • DIMETHYLAMINE
  • DMA-40
  • DMA-60
  • DMA-65
  • METFORMIN HYDROCHLORIDE IMP F
  • LABOTEST-BB LTBB000394
  • DiMethylaMine aq
  • Dimethylamine (50% in water)
  • Dimethylamine 40% w/v solution
  • N N DIMETYLANILINE
  • Dimethylamine 33% water solution
  • DIMETHYLAMINE, 2.0M SOLUTION IN TETRA-HY DROFURAN
  • DIMETHYLAMINE SOLUTION, 33% IN ABS. ETHA NOL
  • DIMETHYLAMINE, CYL. WITH 27 L (NET ~15 K G)
  • DIMETHYLAMINE, PRESSURE TIN WITH 250 ML (NET ~170 G)
  • DIMETHYLAMINE, PRESSURE TIN WITH 100 ML
  • DIMETHYLAMINE SOLUTION, 40% IN WATER
  • Dimethylamine solution ca. 40 %
  • DIMETHYLAMINE, 2.0M SOLUTION IN METHYL A LCOHOL
  • DIMETHYLAMINE SOLUTION, 60% IN WATER(~11 .0 M)
  • TRIMETHYLAMINE, 25 WT. % SOLUTION IN WATER
  • Dimethylamine solution ca. 60 %
  • DIMETHYLAMINE, ANHYDROUS, 99+%
  • DIMETHYLAMINE, CYL. WITH 7 L (NET ~4 KG)
  • Dimethylamine 2M absolute in tetrahydrofuran solution
  • Dimethylamine methanol solution
  • Dimethylamine solution in ethanol30%wt
  • DIMETHYLAMINE, CYL. WITH 2 L (NET 1.1 KG )
  • DimethylamineSolution40%
  • DIMETHYLAMINE SOLUTION 40%
  • Methylamines, mono-, di-, and tri-
  • Dimethylamine, 26 wt.% solution in water
  • Dimethylamine, 2M solution in methyl alcohol
  • Dimethylamine, 2M solution in THF
  • DIMETHYLAMINE,40%SOLUTION
  • Dimethylamine, 40% aqueous solution
  • DIMETHYLAMINE 40% SOLUTION IN WATER
  • Dimethylamine, 40% w/w aq. soln.
  • Dimethylamine, 2M in tetrahydrofuran
  • Dimethylamine, 2M in methanol
  • Dimethylamine (ca. 11% in Methanol, ca. 2.0mol/L)
  • N-Methylmethanamin
  • n-methyl-methanamin